Linux bridges are automatically set UP when
any parent interface is UP.
But for OVS bridges it doesn't work.
For dpdk and non-dpdk bridges, always create a
config file in /etc/network/interfaces.u/ and
bring the bridge interface up after it is configured,
even if it doesn't have IP address.
Change-Id: I92888ce0d373e412dfb7ed2e2398c0d4d008e301
Closes-Bug: https://mirantis.jira.com/browse/PROD-24343
This typo mistake affects behavior of user.present module function
as it uses 'useradd' linux utility under the hood.
Missing USERGROUPS_ENAB parameter == do not create user groups by default.
This change in behavior of useradd util breaks all states, which are relaying
on creation of user group during new user creation procedure, e.g. set up
cassandra backups.
Change-Id: Ie17aae58fc6673b9c5d53bb68f681446f30d0a1a
Related-bug: PROD-23741
* Ubuntu pinning params allow to be used
multiply times. In same time, old `list`
format now allowing to be predictable
iterated inside jinja
Related-Bug: PROD-21604 (PROD:21604)
Change-Id: If1c0f0f834a296b9a19d0af5fc7673c9229a7ac5
Since we added to nstat's telegraf plugin the possibility
to collect data from `/proc/net/softnet_stat` regarding
dropped packets and rx_net_action a.k.a time squeeze, we need to enable
it globally on all hosts.
Also grafana dashboard update to include new graphs + added four
new Prometheus alers.
Related-Bug: PROD-21090
Change-Id: I9dfe87bdc8b677a51e3f305dd3c75c7d4cc4e0d4
The patch adds ability to configure variety logging options
for OVS. In order to configure OVS log options the below pillar
sctructure should be used:
linux:
network:
openvswitch:
enabled: true
logging:
enabled: true
ovsdb:
console: emer
syslog: err
file: info
facility: local0
vswitchd:
console: emer
syslog: err
file: info
facility: local1
Change-Id: I59ef0636447a974215d872259a26beb858495cfb
Related-PROD: PROD-19980
When we use the upstart, setup-loopback should be running as a
service to pass the salt linux.storage.loopback state
(service.running).
Change-Id: I9b19a94126b497d89bd6d05f43dca1df0304c0c6
Closes-bug: PROD-19847
This patch implements pam ldap integration for linux host.
Related Prod: PROD-16022
Customer-Found
Change-Id: I2a05cfb4821d176724f03c61253700ef1f4d0bd8
Fixed:
* The udev-rules template is not tested
* Wrong unicode character in the template leads to udev ignoring
the rule completely
* The template is unable to be rendered due to absent import
* udev is not retrigerred with new rules
Change-Id: I134b5e49b883afcc5e34feaaa561d7ca70192796
Closes-Bug: PROD-16649
A minus at the end of a block prevents whitespace to be added.
In this particular case a new line between the last parameter in a section
and the next section is ommitted. The result looks like this:
[Section1]
Param1=Value
Param2=Value[Section2]
Param3=Value
Change-Id: I9faba3857f46f70ec0ddc380e6b84f72a5dc16e4
If ovs port is virtual, we use OVSIntPort to create it.
Otherwise it should be OVSPort.
I've added new key: ovs_port_type to not intersect with current
deployments and not hurt anyone.
I've updated doc to have an example of ovs peering patch.
Customer-Found
Change-Id: Ieddb5fcc02d410c3cc14c89737992690cb5f3975
This change adds the Telegraf configuration to collect swap metrics, the
associated Prometheus alarms and graphs to the Grafana dashboard.
Change-Id: I3595fd0b8cab06215c620642da69dd29c398396a
Currently when Salt starts setup-loopback-device service
systemd executes losetup command and even if it worked
successfully, systemd marks service as inactive(dead).
And Salt considers service as dead. In order to fix
this behavior, we need to add RemainAfterExit=true to
loopback systemd unit template.
Other changes:
.gitreview added
Related Prod: https://mirantis.jira.com/browse/PROD-11760
Change-Id: I6d0c3baf1c22d0a626ff1fd6aaab802c08fb029e
* RIL-267 Adding cpu governor and kernel module opts
* RIL-267 Adding cpu governor and kernel module opts
* RIL-267 Adding cpu governor and kernel module opts
To configure:
* set system.netconsole.enabled to true
* create system.netconsole.target dict
* set a record with IP address and MAC and interface as subdict
It works with both static and DHCP interfaces, and applies online.
You could use bash-scripting in netconsole.conf.
You could override the MAC.
See tests/pillar/system.sls for further information.
Change-Id: I1cbde47575eb5d32a34cd6d79a063f42dbea7643
Need to remove useless semicolon because it is not working properly.
For example:
root@node:~# grep http_proxy /etc/environment
http_proxy="http://10.0.0.1:8080";
root@node:~# env | grep http_proxy
http_proxy=http://10.0.0.1:8080";
root@node:~# curl http://google.com
curl: (7) Failed to connect to 10.0.0.1 port 80: Connection refused
root@node:~# export http_proxy=http://10.0.0.1:8080;
root@node:~# curl http://google.com
<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">
<TITLE>302 Moved</TITLE></HEAD><BODY>
<H1>302 Moved</H1>
The document has moved
<A HREF="http://www.google.co.in/?gfe_rd=cr&ei=_WTaWKLuD4iI8QfC0azABw">here</A>.
</BODY></HTML>
Tomas Pipota
Gleb Galkin
Dennis Dmitriev
Anton Samoylov
azvyagintsev
Dmitry Teselkin
Mateusz Matuszkowiak
Ondrej Smola
Dmitry Kalashnik
Aleš Komárek
Dzmitry Stremkouski
Oleksii Chupryn
Oleh Hryhorov
ibumarskov
Michel Nederlof
Michael Fladischer
Filip Pytloun
Martin Polreich
Jiri Broulik
Denis V. Meltsaykin
Andrei Danin
Serhiy Ovsianikov
Olivier Bourdon
Ales Komarek
Jaymes Mosher
Simon Pasquier
Petr Michalec
Mykyta Karpin
Andrey Shestakov
teoyaomiqui
Jakub Josef
Oleksandr Vlasov
Vladimir Eremin
Alexander Noskov