* Update file.sls

add replace

* Update file.sls

update replace

* Update job.sls

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.
https://docs.saltstack.com/en/master/ref/states/all/salt.states.cron.html

* Update README.rst

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.

* Update README.rst

* fix(deprecation): update to new method (#214)

Signed-off-by: Felipe Zipitria <fzipitria@perceptyx.com>

* Allow swap to be completely disabled

* sort repos so they do not change order every run

* allow use of new state syntax for module.run

The new syntax has been supported since ~2017.
From the docs, in case they change:

! New Style
test.random_hash:
  module.run:
    - test.random_hash:
      - size: 42
      - hash_type: sha256

! Legacy Style
test.random_hash:
  module.run:
    - size: 42
    - hash_type: sha256

* Update map.jinja

Add support fpr Ubuntu Focal.

* Update file.sls

added possibility to delete files

* Network resolf.conf handling

the handling as the Resolv.conf is generated and adapted, adapted.
previously the Resolv.conf was created and then through
Overwrite "network.system" in the interface.sls again.
With two search servers that should actually be included.
"search example.com. sudomain.example.com"
but it always became that
search ['example.com.', 'sudomain.example.com']

The resolv.conf was first created correctly but then overwritten again in the interface.sls.

The problem only arises if you don't want to have a "Domain:" in resov.conf

* rewrite LVM lv_present

Since salt now also supports LV extend and reduce, the option Force must be used with care.

The changes include that force is only set if the corresponding LV does not yet exist (check via Grains) in order to overwrite any FS signatures (Wiping fs signature).

If the LV already exists (check via Grains), Force is set to False unless this is explicitly set to True in the pillars.

* Network resolf.conf handling (#220) (#8)

* Update file.sls

add replace

* Update file.sls

update replace

* Update job.sls

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.
https://docs.saltstack.com/en/master/ref/states/all/salt.states.cron.html

* Update README.rst

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.

* Update README.rst

* fix(deprecation): update to new method (#214)

Signed-off-by: Felipe Zipitria <fzipitria@perceptyx.com>

* Allow swap to be completely disabled

* sort repos so they do not change order every run

* allow use of new state syntax for module.run

The new syntax has been supported since ~2017.
From the docs, in case they change:

! New Style
test.random_hash:
  module.run:
    - test.random_hash:
      - size: 42
      - hash_type: sha256

! Legacy Style
test.random_hash:
  module.run:
    - size: 42
    - hash_type: sha256

* Update map.jinja

Add support fpr Ubuntu Focal.

* Update file.sls

added possibility to delete files

* Network resolf.conf handling

the handling as the Resolv.conf is generated and adapted, adapted.
previously the Resolv.conf was created and then through
Overwrite "network.system" in the interface.sls again.
With two search servers that should actually be included.
"search example.com. sudomain.example.com"
but it always became that
search ['example.com.', 'sudomain.example.com']

The resolv.conf was first created correctly but then overwritten again in the interface.sls.

The problem only arises if you don't want to have a "Domain:" in resov.conf

Co-authored-by: Felipe Zipitría <fzipi@fing.edu.uy>
Co-authored-by: Kyle Gullion <kgullion@gmail.com>
Co-authored-by: Matthew Thode <thode@fsi.io>
Co-authored-by: Matthew Thode <mthode@mthode.org>

Co-authored-by: Felipe Zipitría <fzipi@fing.edu.uy>
Co-authored-by: Kyle Gullion <kgullion@gmail.com>
Co-authored-by: Matthew Thode <thode@fsi.io>
Co-authored-by: Matthew Thode <mthode@mthode.org>

* Network resolf.conf handling (#220) (#9)

* Update file.sls

add replace

* Update file.sls

update replace

* Update job.sls

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.
https://docs.saltstack.com/en/master/ref/states/all/salt.states.cron.html

* Update README.rst

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.

* Update README.rst

* fix(deprecation): update to new method (#214)

Signed-off-by: Felipe Zipitria <fzipitria@perceptyx.com>

* Allow swap to be completely disabled

* sort repos so they do not change order every run

* allow use of new state syntax for module.run

The new syntax has been supported since ~2017.
From the docs, in case they change:

! New Style
test.random_hash:
  module.run:
    - test.random_hash:
      - size: 42
      - hash_type: sha256

! Legacy Style
test.random_hash:
  module.run:
    - size: 42
    - hash_type: sha256

* Update map.jinja

Add support fpr Ubuntu Focal.

* Update file.sls

added possibility to delete files

* Network resolf.conf handling

the handling as the Resolv.conf is generated and adapted, adapted.
previously the Resolv.conf was created and then through
Overwrite "network.system" in the interface.sls again.
With two search servers that should actually be included.
"search example.com. sudomain.example.com"
but it always became that
search ['example.com.', 'sudomain.example.com']

The resolv.conf was first created correctly but then overwritten again in the interface.sls.

The problem only arises if you don't want to have a "Domain:" in resov.conf

Co-authored-by: Felipe Zipitría <fzipi@fing.edu.uy>
Co-authored-by: Kyle Gullion <kgullion@gmail.com>
Co-authored-by: Matthew Thode <thode@fsi.io>
Co-authored-by: Matthew Thode <mthode@mthode.org>

Co-authored-by: Felipe Zipitría <fzipi@fing.edu.uy>
Co-authored-by: Kyle Gullion <kgullion@gmail.com>
Co-authored-by: Matthew Thode <thode@fsi.io>
Co-authored-by: Matthew Thode <mthode@mthode.org>

* Update mount.sls

added the possibility to set the dump and pass option

dump
    The dump value to be passed into the fstab, Default is 0
pass_num
    The pass value to be passed into the fstab, Default is 0

* Update mount.sls

correction, wrong line.
added the possibility to set the dump and pass option

dump
    The dump value to be passed into the fstab, Default is 0
pass_num
    The pass value to be passed into the fstab, Default is 0

* Add Bind Mount Option

Add Bind Mount Option

* Add support for template defaults/context args

* Add IPv6 Interface Support

Add IPv6 Interface Support
First Version

* Fix warning in salt v3003

The 'gid_from_name' argument in the user.present state has been replaced
with 'usergroup'. Update your SLS file to get rid of this warning.

* Update map.jinja

add Jammy Support

---------

Signed-off-by: Felipe Zipitria <fzipitria@perceptyx.com>
Co-authored-by: Felipe Zipitría <fzipi@fing.edu.uy>
Co-authored-by: Kyle Gullion <kgullion@gmail.com>
Co-authored-by: Matthew Thode <thode@fsi.io>
Co-authored-by: Matthew Thode <mthode@mthode.org>
Co-authored-by: Bruno Binet <bruno.binet@gmail.com>

* Update file.sls

add replace

* Update file.sls

update replace

* Update job.sls

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.
https://docs.saltstack.com/en/master/ref/states/all/salt.states.cron.html

* Update README.rst

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.

* Update README.rst

* fix(deprecation): update to new method (#214)

Signed-off-by: Felipe Zipitria <fzipitria@perceptyx.com>

* Allow swap to be completely disabled

* sort repos so they do not change order every run

* allow use of new state syntax for module.run

The new syntax has been supported since ~2017.
From the docs, in case they change:

! New Style
test.random_hash:
  module.run:
    - test.random_hash:
      - size: 42
      - hash_type: sha256

! Legacy Style
test.random_hash:
  module.run:
    - size: 42
    - hash_type: sha256

* Update map.jinja

Add support fpr Ubuntu Focal.

* Update file.sls

added possibility to delete files

Co-authored-by: Felipe Zipitría <fzipi@fing.edu.uy>
Co-authored-by: Kyle Gullion <kgullion@gmail.com>
Co-authored-by: Matthew Thode <thode@fsi.io>
Co-authored-by: Matthew Thode <mthode@mthode.org>

* Update file.sls

add replace

* Update file.sls

update replace

Change-Id: Ifb45b2cf72d71caa9c8a63f8e7684fd15b81e450
Implements: jira/CLOUDB-487
Signed-off-by: Gabor Orosz <gabor.orosz@ericsson.com>

Yaml serializer splits long lines into multiple lines, which causes salt
parsing of generated yaml to fail.

Ensure presence of file to be serialized through one of the serializer modules
(see: https://docs.saltstack.com/en/latest/ref/serializers/all/index.html):

iteritems() was dropped in recent Python3 releases and items() is compatible
with Python 2.7.

Change-Id: Ia286ac4377c6b03ce16c9dc1a5c7d3441efe7e12

file.managed use "mode" option and not "file_mode" to configure the
perms of the managed file.
See: https://docs.saltstack.com/en/latest/ref/states/all/salt.states.file.html#salt.states.file.managed

Change-Id: Ibd0a024bcd69089d9835a18f2bb803c952e13967