Change-Id: Ia841e735113082d82000874594a7bf0723f4910f
Closes-Bug: #PROD-16236

Current logic does not apply n_rxq, pmd_rxq_affinity and mtu
for a dpdk port in case it is attached directly to a bridge
(not bonded).
This patch makes formula apply parameters in both cases.

Change-Id: I5b19999b1ac8a80d1e31b266fede7dad0d7fd0d4

This workaround is required until salt with the patch [1] is not
used.

- use 'ifenslave' tool to enslave necessary interfaces only if bond
  interface has been changed
- install package that provides 'ifenslave' tool

[1] https://github.com/saltstack/salt/pull/39912

Change-Id: I65b607f26cf7319efb60f154951855d1334e1640

Non-destructive patch, won't affect anything because this
option is not used in any model yet.

Official guide for network.managed state provides an example:
bond0:
  network.managed:
    - type: bond
    - slaves: eth2 eth3
    - require:
      - network: eth2
      - network: eth3
    ...
without parameter: '- use:'

* add a new option 'require_interfaces' that allows to set
  '- require:' not only for 'bridge' interfaces
* using 'require_interfaces' allows to fix the order for states
  that create bonds (do not try to create bond0 before slave
  interfaces are configured!)
* using 'require_interfaces' allows to fix the order for states
  that create VLANs (do not try to create tagged interfaces before
  parent interface is created, it locks the parent interface
  creation!), example: bond0.2516 created before bond0
* using 'require_interfaces' allows to fix the order for states
  that depend on OVS interfaces

Change-Id: Id4539a7e24f2c55fb62afe5d47e485effc9a882b

Change-Id: I8f2a66c6edafc425794d7cedc8b9217df7ee5951

Change-Id: If2d31176d28d85c7d13cc44f34f923a821942f46

Change-Id: I4dc6d6db82dc4074ed247b7fc0c29bfdc867b0d6

Change-Id: Ia97c5a79c5298f24aca6ca9148ce48546f3bcb70

Interface name was hardcoded when checking if peer is set for
ovs interface.
This patch unhardcode interface name.

Change-Id: Id465d5f84751b5516aebc9d80716d21d14e56abc

This patch adds dependency for ovs_port_up_{{ interface_name }} on
linux_interfaces_final_include. This is needed to avoid errors like
"Unknown interface XXX"

Change-Id: I763ff8ae32a170df3802a65a547c6e76959a0137

Change of mtu is not handled by reclass. Example interface:
```
        br_ctl:
          enabled: true
          type: bridge
          proto: static
          mtu: 1450
          address: ${_param:single_address}
          gateway: ${_param:ctl_gateway}
          netmask: ${_param:control_network_netmask}
          use_interfaces:
          - ${_param:primary_first_nic}
```

Change-Id: Iec857e4ac374b7787892144c772063796be87c4b

This enables a more fine tuned dpdk for better performance.
More details on pmd-rxq-affinity config:
http://docs.openvswitch.org/en/latest/howto/dpdk/

Change-Id: I630c6af94ff733619fb175f522fc515984862ff6

Allows configuring general section as well as configuring
    each dhcp enabled interface separetly.
    Does not allow alias or lease configuration.

We need to save our manualy managed interfaces to different directory to
workaround salt bug that causes interface deconfiguration in
/etc/network/interfaces for interfaces manualy configured in
/etc/network/interfaces.d

Upstream-Bug: https://github.com/saltstack/salt/issues/40262

Config:

linux:
  network:
    tap_custom_txqueuelen: 10000

in case of configuration parameter defined will create file:

/etc/udev/rules.d/60-net-txqueue.rules

with content:

KERNEL==”tap[0-9a-z\-]*", RUN+="/sbin/ip link set %k txqueuelen 10000"

Add possiblity to add ip address and mtu on dpdk ovs bridge to
be able use VXLAN as tenant segmentation.

Change-Id: I1394d30c5d9935218841b17ff7651dac7b4abefa
Epic: PROD-8957

Introduce dpdk support for linux OVS configuration.
It configures dpdk interface bind, ovs dpdk ports, bonding,
parameters for dpdk cpu pmd and set multique queues for specific
ovs dpdk interfaces.

Change-Id: I3f38660bab8db0c2b38f03ed8c94eb10b6b3beb9
Epic: PROD-8957
Epic: PROD-8958

"names" makes a separate call to the package management frontend to
install each package, whereas "pkgs" makes just a single call so that it
improves performance.

Change-Id: I48f912c9d966c99d78cd2e89b605a2d016afe18b

Before adding new records to /etc/hosts, remove all hostnames
that are managed by the model but have different addresses
than provided in the model.

Change-Id: Idf5a30429497c33027e6ba973e684ba0443a1edf

Parameter purge_hosts will enforce whole /etc/hosts file, removing entries
that are not defined in model except defaults for both IPv4 and IPv6 localhost
and hostname + fqdn.

It's good to use this option if you want to ensure /etc/hosts is always in a
clean state however it's not enabled by default for safety.

Change-Id: Ieb219b2dd494d5a66ecc52a2ec00dd5157ee2b7a

This reverts commit bedfa10ae6.