Signed-off-by: Matthew Thode <mthode@mthode.org>

modified:   linux/system/motd.sls

	modified:   linux/system/motd.sls

	modified:   linux/system/motd.sls
	modified:   linux/system/motd.sls

	modified:   linux/system/motd.sls

* Update file.sls

add replace

* Update file.sls

update replace

* Update job.sls

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.
https://docs.saltstack.com/en/master/ref/states/all/salt.states.cron.html

* Update README.rst

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.

* Update README.rst

* fix(deprecation): update to new method (#214)

Signed-off-by: Felipe Zipitria <fzipitria@perceptyx.com>

* Allow swap to be completely disabled

* sort repos so they do not change order every run

* allow use of new state syntax for module.run

The new syntax has been supported since ~2017.
From the docs, in case they change:

! New Style
test.random_hash:
  module.run:
    - test.random_hash:
      - size: 42
      - hash_type: sha256

! Legacy Style
test.random_hash:
  module.run:
    - size: 42
    - hash_type: sha256

* Update map.jinja

Add support fpr Ubuntu Focal.

* Update file.sls

added possibility to delete files

* Network resolf.conf handling

the handling as the Resolv.conf is generated and adapted, adapted.
previously the Resolv.conf was created and then through
Overwrite "network.system" in the interface.sls again.
With two search servers that should actually be included.
"search example.com. sudomain.example.com"
but it always became that
search ['example.com.', 'sudomain.example.com']

The resolv.conf was first created correctly but then overwritten again in the interface.sls.

The problem only arises if you don't want to have a "Domain:" in resov.conf

Co-authored-by: Felipe Zipitría <fzipi@fing.edu.uy>
Co-authored-by: Kyle Gullion <kgullion@gmail.com>
Co-authored-by: Matthew Thode <thode@fsi.io>
Co-authored-by: Matthew Thode <mthode@mthode.org>

* Update file.sls

add replace

* Update file.sls

update replace

* Update job.sls

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.
https://docs.saltstack.com/en/master/ref/states/all/salt.states.cron.html

* Update README.rst

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.

* Update README.rst

* fix(deprecation): update to new method (#214)

Signed-off-by: Felipe Zipitria <fzipitria@perceptyx.com>

* Allow swap to be completely disabled

* sort repos so they do not change order every run

* allow use of new state syntax for module.run

The new syntax has been supported since ~2017.
From the docs, in case they change:

! New Style
test.random_hash:
  module.run:
    - test.random_hash:
      - size: 42
      - hash_type: sha256

! Legacy Style
test.random_hash:
  module.run:
    - size: 42
    - hash_type: sha256

* Update map.jinja

Add support fpr Ubuntu Focal.

* Update file.sls

added possibility to delete files

Co-authored-by: Felipe Zipitría <fzipi@fing.edu.uy>
Co-authored-by: Kyle Gullion <kgullion@gmail.com>
Co-authored-by: Matthew Thode <thode@fsi.io>
Co-authored-by: Matthew Thode <mthode@mthode.org>

The new syntax has been supported since ~2017.
From the docs, in case they change:

! New Style
test.random_hash:
  module.run:
    - test.random_hash:
      - size: 42
      - hash_type: sha256

! Legacy Style
test.random_hash:
  module.run:
    - size: 42
    - hash_type: sha256

* Update file.sls

add replace

* Update file.sls

update replace

* Update job.sls

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.
https://docs.saltstack.com/en/master/ref/states/all/salt.states.cron.html

* Update README.rst

Added the opportunity to set a job with a special keyword like '@reboot' or '@hourly'. Quotes must be used, otherwise PyYAML will strip the '@' sign.

* Update README.rst

* Added journal settings

* Fixed error:
    ----------
                 ID: package_duo
           Function: pkg.installed
               Name: duo-unix
             Result: False
            Comment: Problem encountered installing package(s). Additional info follows:
              errors:
                  - E: There were unauthenticated packages and -y was used without --allow-unauthenticated

* Removed 2016 system checks as it doesn't support path_join and added 2019 version checks

----------
                 ID: package_duo
           Function: pkg.installed
               Name: duo-unix
             Result: False
            Comment: Problem encountered installing package(s). Additional info follows:
              errors:
                  - E: There were unauthenticated packages and -y was used without --allow-unauthenticated

* Update file.sls

add replace

* Update file.sls

update replace

* Allow uid change

* feat(formula/group): enable the use of members in group.present

cron.absent   with the right user (default is root)

See salt issues #48309 #51925

* update lvm to create lv´s first

* add force: true  for "Wiping fs signature"

* update mount first

System modules are enables by default. But they should only be enables if
in pillars defined and supported by os_family.

Support for Redhat os_family systems is missing in at and cron #174

Multi-Factor Authentication (MFA) for sshd+PAM
https://duo.com/product/multi-factor-authentication-mfa

Related-Prod: PROD-24422
Change-Id: Iddec5a5e99e7db5d7f173ad939d3fd0cac1cd22b

Linux bridges are automatically set UP when
any parent interface is UP.

But for OVS bridges it doesn't work.

For dpdk and non-dpdk bridges, always create a
config file in /etc/network/interfaces.u/ and
bring the bridge interface up after it is configured,
even if it doesn't have IP address.

Change-Id: I92888ce0d373e412dfb7ed2e2398c0d4d008e301
Closes-Bug: https://mirantis.jira.com/browse/PROD-24343

Issue description:

  PXE interfaces, which are used by salt should not be restarted
during salt calls, otherwise communication between salt master and
salt minion would be interrupted.
  Therefore it is possible to specify "noifupdown: True" in pillars
for this interface or group of interfaces, which are used for PXE
network.
  This pillar structure will remain until one removes it manualy.
  It is not possible to remove it during deploy and enforce network
state without touching the model.

  It is possible to override pillars from CLI like:
  # salt ctl01* state.apply linux.network.interface \
    pillar='{"linux":{"network":{"interface":{"ens3":{"noifupdown":True}}}}}'

  However it is not easy/possible to predict all interfaces for PXE
network.

Solution:
  Provide global noifupdown pillar value check.
  If it exists, noifupdown will take effect and not otherwise.
  So our deployment would have next steps:
  - Execute: linux.network.interface pillar='{"linux":{"network":{"noifupdown":True}}}'
  - Reboot node to enable kernel params like hugepages etc.
  - Execute: linux.network.interface with no params to ensure PXE.

Pipelines may pass this parameter to control noifupdown behavior.

Change-Id: I8863f972c7805e4bf4f9e104d6c0ddf055c39cb1

Change-Id: Ifb45b2cf72d71caa9c8a63f8e7684fd15b81e450
Implements: jira/CLOUDB-487
Signed-off-by: Gabor Orosz <gabor.orosz@ericsson.com>

Current thresholds don't matche real warning/minor values for
the time_squeeze numbers. As a result we have false positive.

Change-Id: I6990c101fe671c05d75d0640fd6799667b5f3fa1
Related-PROD: PROD-24406 (PROD:24406)

Change-Id: I3338950ed3726a750149d849d33813b0eeed50c0

* Add ability to disable some swap entities and enable others

Change-Id: Ic2f947f7b9fc6f29411a9171d68eb0836fce29ed
Related-task: #PROD-23150 (PROD:23150)

This typo mistake affects behavior of user.present module function
as it uses 'useradd' linux utility under the hood.
Missing USERGROUPS_ENAB parameter == do not create user groups by default.
This change in behavior of useradd util breaks all states, which are relaying
on creation of user group during new user creation procedure, e.g. set up
cassandra backups.

Change-Id: Ie17aae58fc6673b9c5d53bb68f681446f30d0a1a
Related-bug: PROD-23741

https://gerrit.mcp.mirantis.com/25351/ was merged but linux.system.shell
state wasn't included into init.yml and was never used.

This commit fixes this.

Related-Prod: PROD-23581

Change-Id: I89e09247dd2566b8a5b0c0e67e8ca9c789ed57f6

To simplify filtering in Kibana change
systemd.source prefix to record field "source".

Change-Id: I7729ae6721a1050a938370a588d35313f91f971a
Related-bug: PROD-21827 (PROD:21827)

Previous implementation was not able to add port 'dpdk0' to bridge
'br-dpdk0' since both matches 'grep' condition. To fix this we need to
look for port in a particular bridge

Change-Id: Ie83cebc3ab73c45a48f68fae2d6f474743215908

Change-Id: Ia8690d3968aa6c8491ec62b73f78afd6b2361c60

Change-Id: If1bbd97b5719c53193f6287c4a025e6ef0dafbb0
Related-Prod: PROD-18386

The following parameters defined in /etc/login.defs can
be overridden per-user:

* PASS_MAX_DAYS
* PASS_MIN_DAYS
* PASS_WARN_DAYS
* INACTIVE

Related-Prod: PROD-18386

Change-Id: I5b182128f9dd8a043b48fb86e61febb2fd5c7e0a

* apt tool sensetive for tralling spaces, and 2 files
    aka:
    cat -E mcp_saltstack
    $
    Package: libsodium18$
    Pin: release o=SaltStack$
    Pin-Priority: 50$
      $
    Package: *$
    Pin: release o=SaltStack$
    Pin-Priority: 1100$
      $
    # VS
    cat -E mcp_saltstack
    $
    Package: libsodium18$
    Pin: release o=SaltStack$
    Pin-Priority: 50$
    $
    Package: *$
    Pin: release o=SaltStack$
    Pin-Priority: 1100$
    $
    Make's different logic for apt

Change-Id: Ia5fdbe319a65b0fa017c8c065905db1837f9f982

Prod-Related: EME-405

Change-Id: Id9a8ebefb227c4b0a99d8cdd955c39401720bbee

as it will fail because dbus service is not running

Change-Id: I498f5b09b146c643f4d53ab0cb65146274f12b5d

* Ubuntu pinning params allow to be used
     multiply times. In same time, old `list`
     format now allowing to be predictable
     iterated inside jinja

Related-Bug: PROD-21604 (PROD:21604)

Change-Id: If1c0f0f834a296b9a19d0af5fc7673c9229a7ac5

Fixes: PROD-23149 (PROD:23149)

Change-Id: I14c68a0a519a63951571f966fae72fd01ec2e556

* CIS 1.4.1 Ensure permissions on bootloader config are configured

Related-Prod: PROD-22655

Change-Id: Ia282baae0be5c038d42b672758662aaed9aae6f5

Permissions 640 root:root doesn't allow regular user to read
/etc/{at,cron}.allow files, that changes behavior of at / crontab
commands:

* crontab command can't read /etc/cron.allow and allow any user to modify
  their crontab files.
* at command can't read /etc/at.allow and deny every user.

at / crontab files have SGID bits set, so setting correct group
on /etc/{at,cron}.allow fixes the issue.

Change-Id: I4a3fc8d8e823498d6715e26307424e3065cbd6ca

* CIS 5.4.4 Ensure default user umask is 027 or more restrictive (Scored)
* CIS 5.4.5 Ensure default user shell timeout is 900 seconds or less (Scored)

Related-Prod: PROD-20765

Change-Id: I5ff5e5bc76e1d87432caec70f2b35eec288e9213