old-salt-formula/salt/files/minion.d/f_defaults.conf

# This file managed by Salt, do not edit by hand!!
#  Based on salt version 2015.8.7 default config
#
{% set reserved_keys = ['master', 'minion', 'cloud', 'salt_cloud_certs', 'engines', 'beacons'] -%}
{% set cfg_salt = pillar.get('salt', {}) -%}
{% set cfg_minion = cfg_salt.get('minion', {}) -%}
{% set default_keys = [] -%}
{%- macro get_config(configname, default_value) -%}
{%- do default_keys.append(configname) %}
{%- if configname in cfg_minion -%}
{{ configname }}: {{ cfg_minion[configname]|json }}
{%- elif configname in cfg_salt and configname not in reserved_keys -%}
{{ configname }}: {{ cfg_salt[configname]|json }}
{%- else -%}
#{{ configname }}: {{ default_value|json }}
{%- endif -%}
{%- endmacro -%}
{%- from 'salt/formulas.jinja' import file_roots, formulas with context -%}

##### Primary configuration settings #####
##########################################
# This configuration file is used to manage the behavior of the Salt Minion.
# With the exception of the location of the Salt Master Server, values that are
# commented out but have an empty line after the comment are defaults that need
# not be set in the config. If there is no blank line after the comment, the
# value is presented as an example and is not the default.

# Per default the minion will automatically include all config files
# from minion.d/*.conf (minion.d is a directory in the same directory
# as the main minion config file).
{{ get_config('default_include', 'minion.d/*.conf') }}

# Set the location of the salt master server. If the master server cannot be
# resolved, then the minion will fail to start.
{%- if 'master' in cfg_minion and cfg_minion['master'] is not string %}
master:
  {% for name in cfg_minion['master'] -%}
  - {{ name }}
  {% endfor -%}
{%- else %}
{{ get_config('master', 'salt') }}
{%- endif %}

# Set http proxy information for the minion when doing requests
{% if 'proxy_host' in cfg_minion -%}
{%- do default_keys.append('proxy_host') %}
proxy_host: {{ cfg_minion['proxy_host'] }}
{% else -%}
#proxy_host:
{%- endif %}
{% if 'proxy_port' in cfg_minion -%}
{%- do default_keys.append('proxy_port') %}
proxy_port: {{ cfg_minion['proxy_port'] }}
{% else -%}
#proxy_port:
{%- endif %}
{% if 'proxy_username' in cfg_minion -%}
{%- do default_keys.append('proxy_username') %}
proxy_username: {{ cfg_minion['proxy_username'] }}
{% else -%}
#proxy_username:
{%- endif %}
{% if 'proxy_password' in cfg_minion -%}
{%- do default_keys.append('proxy_password') %}
proxy_password: {{ cfg_minion['proxy_password'] }}
{% else -%}
#proxy_password:
{%- endif %}

# If multiple masters are specified in the 'master' setting, the default behavior
# is to always try to connect to them in the order they are listed. If random_master is
# set to True, the order will be randomized instead. This can be helpful in distributing
# the load of many minions executing salt-call requests, for example, from a cron job.
# If only one master is listed, this setting is ignored and a warning will be logged.
# NOTE: If master_type is set to failover, use master_shuffle instead.
{{ get_config('random_master', 'False') }}

# Use if master_type is set to failover.
{{ get_config('master_shuffle', 'False') }}

# Minions can connect to multiple masters simultaneously (all masters
# are "hot"), or can be configured to failover if a master becomes
# unavailable.  Multiple hot masters are configured by setting this
# value to "str".  Failover masters can be requested by setting
# to "failover".  MAKE SURE TO SET master_alive_interval if you are
# using failover.
{{ get_config('master_type', 'str') }}

# verify_master_pubkey_sign
{{ get_config('verify_master_pubkey_sign', 'False') }}

# Poll interval in seconds for checking if the master is still there.  Only
# respected if master_type above is "failover". To disable the interval entirely,
# set the value to -1. (This may be necessary on machines which have high numbers
# of TCP connections, such as load balancers.)
{{ get_config('master_alive_interval', '30') }}

# Set whether the minion should connect to the master via IPv6:
{{ get_config('ipv6', 'False') }}

# Set the number of seconds to wait before attempting to resolve
# the master hostname if name resolution fails. Defaults to 30 seconds.
# Set to zero if the minion should shutdown and not retry.
{{ get_config('retry_dns', '30') }}

# Set the port used by the master reply and authentication server.
{{ get_config('master_port', '4506') }}

# The user to run salt.
{{ get_config('user', 'root') }}

# Setting sudo_user will cause salt to run all execution modules under an sudo
# to the user given in sudo_user.  The user under which the salt minion process
# itself runs will still be that provided in the user config above, but all
# execution modules run by the minion will be rerouted through sudo.
{{ get_config('sudo_user', 'saltdev') }}

# Specify the location of the daemon process ID file.
{{ get_config('pidfile', '/var/run/salt-minion.pid') }}

# The root directory prepended to these options: pki_dir, cachedir, log_file,
# sock_dir, pidfile.
{{ get_config('root_dir', '/') }}

# The directory to store the pki information in
{{ get_config('pki_dir', '/etc/salt/pki/minion') }}

# Explicitly declare the id for this minion to use, if left commented the id
# will be the hostname as returned by the python call: socket.getfqdn()
# Since salt uses detached ids it is possible to run multiple minions on the
# same machine but with different ids, this can be useful for salt compute
# clusters.
{% if 'id' in cfg_minion -%}
{%- do default_keys.append('id') %}
id: {{ cfg_minion['id'] }}
{% else -%}
#id:
{%- endif %}

# Append a domain to a hostname in the event that it does not exist.  This is
# useful for systems where socket.getfqdn() does not actually result in a
# FQDN (for instance, Solaris).
{{ get_config('append_domain', '') }}

# Custom static grains for this minion can be specified here and used in SLS
# files just like all other grains. This example sets 4 custom grains, with
# the 'roles' grain having two values that can be matched against.
#grains:
#  roles:
#    - webserver
#    - memcache
#  deployment: datacenter4
#  cabinet: 13
#  cab_u: 14-15
{{ get_config('grains', '{}') }}

# Where cache data goes.
# This data may contain sensitive data and should be protected accordingly.
{{ get_config('cachedir', '/var/cache/salt/minion') }}

# Verify and set permissions on configuration directories at startup.
{{ get_config('verify_env', 'True') }}

# The minion can locally cache the return data from jobs sent to it, this
# can be a good way to keep track of jobs the minion has executed
# (on the minion side). By default this feature is disabled, to enable, set
# cache_jobs to True.
{{ get_config('cache_jobs', 'False') }}

# Set the directory used to hold unix sockets.
{{ get_config('sock_dir', '/var/run/salt/minion') }}

# Set the default outputter used by the salt-call command. The default is
# "nested".
{{ get_config('output', 'nested') }}

# By default output is colored. To disable colored output, set the color value
# to False.
{{ get_config('color', 'True') }}

# Do not strip off the colored output from nested results and state outputs
# (true by default).
{{ get_config('strip_colors', 'False') }}

# Backup files that are replaced by file.managed and file.recurse under
# 'cachedir'/file_backups relative to their original location and appended
# with a timestamp. The only valid setting is "minion". Disabled by default.
#
# Alternatively this can be specified for each file in state files:
# /etc/ssh/sshd_config:
#   file.managed:
#     - source: salt://ssh/sshd_config
#     - backup: minion
#
{{ get_config('backup_mode', 'minion') }}

# When waiting for a master to accept the minion's public key, salt will
# continuously attempt to reconnect until successful. This is the time, in
# seconds, between those reconnection attempts.
{{ get_config('acceptance_wait_time', '10') }}

# If this is nonzero, the time between reconnection attempts will increase by
# acceptance_wait_time seconds per iteration, up to this maximum. If this is
# set to zero, the time between reconnection attempts will stay constant.
{{ get_config('acceptance_wait_time_max', '0') }}

# If the master rejects the minion's public key, retry instead of exiting.
# Rejected keys will be handled the same as waiting on acceptance.
{{ get_config('rejected_retry', 'False') }}

# When the master key changes, the minion will try to re-auth itself to receive
# the new master key. In larger environments this can cause a SYN flood on the
# master because all minions try to re-auth immediately. To prevent this and
# have a minion wait for a random amount of time, use this optional parameter.
# The wait-time will be a random number of seconds between 0 and the defined value.
{{ get_config('random_reauth_delay', '60') }}

# When waiting for a master to accept the minion's public key, salt will
# continuously attempt to reconnect until successful. This is the timeout value,
# in seconds, for each individual attempt. After this timeout expires, the minion
# will wait for acceptance_wait_time seconds before trying again. Unless your master
# is under unusually heavy load, this should be left at the default.
{{ get_config('auth_timeout', '60') }}

# Number of consecutive SaltReqTimeoutError that are acceptable when trying to
# authenticate.
{{ get_config('auth_tries', '7') }}

# If authentication fails due to SaltReqTimeoutError during a ping_interval,
# cause sub minion process to restart.
{{ get_config('auth_safemode', 'False') }}

# Ping Master to ensure connection is alive (minutes).
{{ get_config('ping_interval', '0') }}

{%- if 'mine_functions' in cfg_minion %}
{%- do default_keys.append('mine_functions') %}
mine_functions:
{%- for func, args in cfg_minion['mine_functions'].items() %}
  {{ func }}: {{ args }}
{%- endfor %}
{%- endif %}


# To auto recover minions if master changes IP address (DDNS)
#    auth_tries: 10
#    auth_safemode: False
#    ping_interval: 90
#
# Minions won't know master is missing until a ping fails. After the ping fail,
# the minion will attempt authentication and likely fails out and cause a restart.
# When the minion restarts it will resolve the masters IP and attempt to reconnect.

# If you don't have any problems with syn-floods, don't bother with the
# three recon_* settings described below, just leave the defaults!
#
# The ZeroMQ pull-socket that binds to the masters publishing interface tries
# to reconnect immediately, if the socket is disconnected (for example if
# the master processes are restarted). In large setups this will have all
# minions reconnect immediately which might flood the master (the ZeroMQ-default
# is usually a 100ms delay). To prevent this, these three recon_* settings
# can be used.
# recon_default: the interval in milliseconds that the socket should wait before
#                trying to reconnect to the master (1000ms = 1 second)
#
# recon_max: the maximum time a socket should wait. each interval the time to wait
#            is calculated by doubling the previous time. if recon_max is reached,
#            it starts again at recon_default. Short example:
#
#            reconnect 1: the socket will wait 'recon_default' milliseconds
#            reconnect 2: 'recon_default' * 2
#            reconnect 3: ('recon_default' * 2) * 2
#            reconnect 4: value from previous interval * 2
#            reconnect 5: value from previous interval * 2
#            reconnect x: if value >= recon_max, it starts again with recon_default
#
# recon_randomize: generate a random wait time on minion start. The wait time will
#                  be a random value between recon_default and recon_default +
#                  recon_max. Having all minions reconnect with the same recon_default
#                  and recon_max value kind of defeats the purpose of being able to
#                  change these settings. If all minions have the same values and your
#                  setup is quite large (several thousand minions), they will still
#                  flood the master. The desired behavior is to have timeframe within
#                  all minions try to reconnect.
#
# Example on how to use these settings. The goal: have all minions reconnect within a
# 60 second timeframe on a disconnect.
# recon_default: 1000
# recon_max: 59000
# recon_randomize: True
#
# Each minion will have a randomized reconnect value between 'recon_default'
# and 'recon_default + recon_max', which in this example means between 1000ms
# 60000ms (or between 1 and 60 seconds). The generated random-value will be
# doubled after each attempt to reconnect. Lets say the generated random
# value is 11 seconds (or 11000ms).
# reconnect 1: wait 11 seconds
# reconnect 2: wait 22 seconds
# reconnect 3: wait 33 seconds
# reconnect 4: wait 44 seconds
# reconnect 5: wait 55 seconds
# reconnect 6: wait time is bigger than 60 seconds (recon_default + recon_max)
# reconnect 7: wait 11 seconds
# reconnect 8: wait 22 seconds
# reconnect 9: wait 33 seconds
# reconnect x: etc.
#
# In a setup with ~6000 thousand hosts these settings would average the reconnects
# to about 100 per second and all hosts would be reconnected within 60 seconds.
{{ get_config('recon_default', '100') }}
{{ get_config('recon_max', '5000') }}
{{ get_config('recon_randomize', 'False') }}

# The loop_interval sets how long in seconds the minion will wait between
# evaluating the scheduler and running cleanup tasks. This defaults to a
# sane 60 seconds, but if the minion scheduler needs to be evaluated more
# often lower this value
{{ get_config('loop_interval', '60') }}

# The grains_refresh_every setting allows for a minion to periodically check
# its grains to see if they have changed and, if so, to inform the master
# of the new grains. This operation is moderately expensive, therefore
# care should be taken not to set this value too low.
#
# Note: This value is expressed in __minutes__!
#
# A value of 10 minutes is a reasonable default.
#
# If the value is set to zero, this check is disabled.
{{ get_config('grains_refresh_every', '1') }}

# Cache grains on the minion. Default is False.
{{ get_config('grains_cache', 'False') }}

# Grains cache expiration, in seconds. If the cache file is older than this
# number of seconds then the grains cache will be dumped and fully re-populated
# with fresh data. Defaults to 5 minutes. Will have no effect if 'grains_cache'
# is not enabled.
{{ get_config('grains_cache_expiration', '300') }}

# Windows platforms lack posix IPC and must rely on slower TCP based inter-
# process communications. Set ipc_mode to 'tcp' on such systems
{{ get_config('ipc_mode', 'ipc') }}

# Overwrite the default tcp ports used by the minion when in tcp mode
{{ get_config('tcp_pub_port', '4510') }}
{{ get_config('tcp_pull_port', '4511') }}

# Passing very large events can cause the minion to consume large amounts of
# memory. This value tunes the maximum size of a message allowed onto the
# minion event bus. The value is expressed in bytes.
{{ get_config('max_event_size', '1048576') }}

# To detect failed master(s) and fire events on connect/disconnect, set
# master_alive_interval to the number of seconds to poll the masters for
# connection events.
#
{{ get_config('master_alive_interval', '30') }}

# The minion can include configuration from other files. To enable this,
# pass a list of paths to this option. The paths can be either relative or
# absolute; if relative, they are considered to be relative to the directory
# the main minion configuration file lives in (this file). Paths can make use
# of shell-style globbing. If no files are matched by a path passed to this
# option then the minion will log a warning message.
#
# Include a config file from some other path:
{% if 'include' in cfg_minion -%}
{% do default_keys.append('include') -%}
    {% if cfg_minion['include'] is iterable and cfg_minion['include'] is not string -%}
        include:
        {%- for include in cfg_minion['include'] %}
            - {{ include }}
        {%- endfor -%}
    {% else -%}
        include: {{ cfg_minion['include'] }}
    {%- endif -%}
{% elif 'include' in cfg_salt -%}
    {% if cfg_salt['include'] is iterable and cfg_salt['include'] is not string -%}
        include:
        {%- for include in cfg_salt['include'] %}
            - {{ include }}
        {%- endfor -%}
    {% else -%}
        include: {{ cfg_salt['include'] }}
    {%- endif -%}
{% endif %}

#####   Minion module management     #####
##########################################
# Disable specific modules. This allows the admin to limit the level of
# access the master has to the minion.
{{ get_config('disable_modules', '[cmd,test]') }}
{{ get_config('disable_returners', '[]') }}

# Modules can be loaded from arbitrary paths. This enables the easy deployment
# of third party modules. Modules for returners and minions can be loaded.
# Specify a list of extra directories to search for minion modules and
# returners. These paths must be fully qualified!
{{ get_config('module_dirs', '[]') }}
{{ get_config('returner_dirs', '[]') }}
{{ get_config('states_dirs', '[]') }}
{{ get_config('render_dirs', '[]') }}
{{ get_config('utils_dirs', '[]') }}

# A module provider can be statically overwritten or extended for the minion
# via the providers option, in this case the default module will be
# overwritten by the specified module. In this example the pkg module will
# be provided by the yumpkg5 module instead of the system default.
#providers:
#  pkg: yumpkg5
{{ get_config('providers', '{}') }}

# Enable Cython modules searching and loading. (Default: False)
{{ get_config('cython_enable', 'False') }}

# Specify a max size (in bytes) for modules on import. This feature is currently
# only supported on *nix operating systems and requires psutil.
{{ get_config('modules_max_memory', '-1') }}

#####    State Management Settings    #####
###########################################
# The state management system executes all of the state templates on the minion
# to enable more granular control of system state management. The type of
# template and serialization used for state management needs to be configured
# on the minion, the default renderer is yaml_jinja. This is a yaml file
# rendered from a jinja template, the available options are:
# yaml_jinja
# yaml_mako
# yaml_wempy
# json_jinja
# json_mako
# json_wempy
#
{{ get_config('renderer', 'yaml_jinja') }}

# The failhard option tells the minions to stop immediately after the first
# failure detected in the state execution. Defaults to False.
{{ get_config('failhard', 'False') }}

# Reload the modules prior to a highstate run.
{{ get_config('autoload_dynamic_modules', 'True') }}

# clean_dynamic_modules keeps the dynamic modules on the minion in sync with
# the dynamic modules on the master, this means that if a dynamic module is
# not on the master it will be deleted from the minion. By default, this is
# enabled and can be disabled by changing this value to False.
{{ get_config('clean_dynamic_modules', 'True') }}

# Normally, the minion is not isolated to any single environment on the master
# when running states, but the environment can be isolated on the minion side
# by statically setting it. Remember that the recommended way to manage
# environments is to isolate via the top file.
{{ get_config('environment', 'None') }}

# If using the local file directory, then the state top file name needs to be
# defined, by default this is top.sls.
{{ get_config('state_top', 'top.sls') }}

# Run states when the minion daemon starts. To enable, set startup_states to:
# 'highstate' -- Execute state.highstate
# 'sls' -- Read in the sls_list option and execute the named sls files
# 'top' -- Read top_file option and execute based on that file on the Master
{{ get_config('startup_states', "''") }}

# List of states to run when the minion starts up if startup_states is 'sls':
#sls_list:
#  - edit.vim
#  - hyper
{{ get_config('sls_list', '[]') }}

# Top file to execute if startup_states is 'top':
{{ get_config('top_file', "''") }}

# Automatically aggregate all states that have support for mod_aggregate by
# setting to True. Or pass a list of state module names to automatically
# aggregate just those types.
#
# state_aggregate:
#   - pkg
#
#state_aggregate: False
{{ get_config('state_aggregate', '{}') }}

#####     File Directory Settings    #####
##########################################
# The Salt Minion can redirect all file server operations to a local directory,
# this allows for the same state tree that is on the master to be used if
# copied completely onto the minion. This is a literal copy of the settings on
# the master but used to reference a local directory on the minion.

# Set the file client. The client defaults to looking on the master server for
# files, but can be directed to look at the local file directory setting
# defined below by setting it to "local". Setting a local file_client runs the
# minion in masterless mode.
{%- if standalone %}
file_client: local
{%- else %}
{{ get_config('file_client', 'remote') }}
{%- endif %}

# The file directory works on environments passed to the minion, each environment
# can have multiple root directories, the subdirectories in the multiple file
# roots cannot match, otherwise the downloaded files will not be able to be
# reliably ensured. A base environment is required to house the top file.
# Example:
# file_roots:
#   base:
#     - /srv/salt/
#   dev:
#     - /srv/salt/dev/services
#     - /srv/salt/dev/states
#   prod:
#     - /srv/salt/prod/services
#     - /srv/salt/prod/states
{% if 'file_roots' in cfg_minion -%}
{%- do default_keys.append('file_roots') %}
{{ file_roots(cfg_minion['file_roots']) }}
{%- elif 'file_roots' in cfg_salt -%}
{{ file_roots(cfg_salt['file_roots']) }}
{%- elif formulas|length -%}
{{ file_roots({'base': ['/srv/salt']}) }}
{%- else -%}
#file_roots:
#  base:
#    - /srv/salt
{%- endif %}


# File Server Backend
#
# Salt supports a modular fileserver backend system, this system allows
# the salt minion to link directly to third party systems to gather and
# manage the files available to minions. Multiple backends can be
# configured and will be searched for the requested file in the order in which
# they are defined here. The default setting only enables the standard backend
# "roots" which uses the "file_roots" option.
#fileserver_backend:
#  - roots
#
# To use multiple backends list them in the order they are searched:
#fileserver_backend:
#  - git
#  - roots
{% if 'fileserver_backend' in cfg_minion -%}
{%- do default_keys.append('fileserver_backend') %}
fileserver_backend:
{%- for backend in cfg_minion['fileserver_backend'] %}
  - {{ backend }}
{%- endfor -%}
{%- endif %}

# By default, the Salt fileserver recurses fully into all defined environments
# to attempt to find files. To limit this behavior so that the fileserver only
# traverses directories with SLS files and special Salt directories like _modules,
# enable the option below. This might be useful for installations where a file root
# has a very large number of files and performance is negatively impacted. Default
# is False.
{{ get_config('fileserver_limit_traversal', 'False') }}

# The hash_type is the hash to use when discovering the hash of a file in
# the local fileserver. The default is md5, but sha1, sha224, sha256, sha384
# and sha512 are also supported.
#
# Warning: Prior to changing this value, the minion should be stopped and all
# Salt caches should be cleared.
{{ get_config('hash_type', 'md5') }}

# gitfs provider
{{ get_config('gitfs_provider', 'pygit2') }}

# Along with gitfs_password, is used to authenticate to HTTPS remotes.
{{ get_config('gitfs_user', 'git') }}

# Along with gitfs_user, is used to authenticate to HTTPS remotes.
# This parameter is not required if the repository does not use authentication.
{{ get_config('gitfs_password', '') }}

# By default, Salt will not authenticate to an HTTP (non-HTTPS) remote.
# This parameter enables authentication over HTTP. Enable this at your own risk.
{{ get_config('gitfs_insecure_auth', 'False') }}

# Along with gitfs_privkey (and optionally gitfs_passphrase), is used to
# authenticate to SSH remotes. This parameter (or its per-remote counterpart)
# is required for SSH remotes.
{{ get_config('gitfs_pubkey', '') }}

# Along with gitfs_pubkey (and optionally gitfs_passphrase), is used to
# authenticate to SSH remotes. This parameter (or its per-remote counterpart)
# is required for SSH remotes.
{{ get_config('gitfs_privkey', '') }}

# This parameter is optional, required only when the SSH key being used to
# authenticate is protected by a passphrase.
{{ get_config('gitfs_passphrase', '') }}
# When using the git fileserver backend at least one git remote needs to be
# defined. The user running the salt master will need read access to the repo.
#
# The repos will be searched in order to find the file requested by a client
# and the first repo to have the file will return it.
# When using the git backend branches and tags are translated into salt
# environments.
# Note:  file:// repos will be treated as a remote, so refs you want used must
# exist in that repo as *local* refs.
{% if 'gitfs_remotes' in cfg_minion -%}
{%- do default_keys.append('gitfs_remotes') %}
gitfs_remotes:
{%- for remote in cfg_minion['gitfs_remotes'] %}
{%- if remote is iterable and remote is not string %}
  {%- for repo, children in remote.items() %}
    - {{ repo }}:
  {%- for child in children %}
    {%- for key, value in child.items() %}
      - {{ key }}: {{ value }}
    {%- endfor -%}
  {%- endfor -%}
  {%- endfor -%}
  {%- else %}
    - {{ remote }}
{%- endif -%}
{%- endfor -%}
{%- endif %}

# The gitfs_ssl_verify option specifies whether to ignore ssl certificate
# errors when contacting the gitfs backend. You might want to set this to
# false if you're using a git backend that uses a self-signed certificate but
# keep in mind that setting this flag to anything other than the default of True
# is a security concern, you may want to try using the ssh transport.
{{ get_config('gitfs_ssl_verify', 'True') }}

# The gitfs_root option gives the ability to serve files from a subdirectory
# within the repository. The path is defined relative to the root of the
# repository and defaults to the repository root.
{{ get_config('gitfs_root', 'somefolder/otherfolder') }}

# The gitfs_env_whitelist and gitfs_env_blacklist parameters allow for greater
# control over which branches/tags are exposed as fileserver environments.
{% if 'gitfs_env_whitelist' in cfg_minion -%}
{%- do default_keys.append('gitfs_env_whitelist') %}
gitfs_env_whitelist:
  {%- for git_env in cfg_minion['gitfs_env_whitelist'] %}
  - {{ git_env }}
  {%- endfor -%}
{% else -%}
# gitfs_env_whitelist:
#   - base
#   - v1.*
{% endif %}

{% if 'gitfs_env_blacklist' in cfg_minion -%}
{%- do default_keys.append('gitfs_env_blacklist') %}
gitfs_env_blacklist:
  {%- for git_env in cfg_minion['gitfs_env_blacklist'] %}
  - {{ git_env }}
  {%- endfor -%}
{% else -%}
# gitfs_env_blacklist:
#   - bug/*
#   - feature/*
{% endif %}

#####         Pillar settings        #####
##########################################
# The Salt pillar is searched for locally if file_client is set to local. If
# this is the case, and pillar data is defined, then the pillar_roots need to
# also be configured on the minion:
{% if 'pillar_roots' in cfg_minion -%}
{%- do default_keys.append('pillar_roots') %}
pillar_roots:
{%- for name, roots in cfg_minion['pillar_roots']|dictsort %}
  {{ name }}:
{%- for dir in roots %}
    - {{ dir }}
{%- endfor -%}
{%- endfor -%}
{% elif 'pillar_roots' in cfg_salt -%}
pillar_roots:
{%- for name, roots in cfg_salt['pillar_roots']|dictsort %}
  {{ name }}:
{%- for dir in roots %}
    - {{ dir }}
{%- endfor -%}
{%- endfor -%}
{%- else -%}
#pillar_roots:
#  base:
#    - /srv/pillar
{%- endif %}

{% if 'ext_pillar' in cfg_minion %}
{%- do default_keys.append('ext_pillar') %}
ext_pillar:
{%- for pillar in cfg_minion['ext_pillar'] -%}
  {%- for key in pillar -%}
    {%- if pillar[key] is string %}
  - {{ key }}: {{ pillar[key] }}
    {#- Workaround for missing `is mapping` on CentOS 6, see #193: #}
    {%- elif pillar[key] is iterable and 'dict' not in pillar[key].__class__.__name__ %}
  - {{ key }}:
      {%- for parameter in pillar[key] %}
    - {{ parameter }}
      {%- endfor -%}
    {#- Workaround for missing `is mapping` on CentOS 6, see #193: #}
    {%- elif 'dict' in pillar[key].__class__.__name__ and pillar[key] is not string %}
  - {{ key }}:
      {%- for parameter in pillar[key] %}
      {{ parameter }}: {{pillar[key][parameter]}}
      {%- endfor %}
    {%- else %}
# Error in rendering {{ key }}, please read https://docs.saltstack.com/en/latest/topics/development/external_pillars.html#configuration
    {% endif %}
  {%- endfor -%}
{%- endfor %}
{% elif 'ext_pillar' in cfg_salt %}
ext_pillar:
{% for pillar in cfg_salt['ext_pillar'] %}
  - {{ pillar.items()[0][0] }}: {{ pillar.items()[0][1] }}
{% endfor %}
{% else %}
#ext_pillar:
#  - hiera: /etc/hiera.yaml
#  - cmd_yaml: cat /etc/salt/yaml
{% endif %}

# The ext_pillar_first option allows for external pillar sources to populate
# before file system pillar. This allows for targeting file system pillar from
# ext_pillar.
{{ get_config('ext_pillar_first', 'False') }}

# The pillar_gitfs_ssl_verify option specifies whether to ignore ssl certificate
# errors when contacting the pillar gitfs backend. You might want to set this to
# false if you're using a git backend that uses a self-signed certificate but
# keep in mind that setting this flag to anything other than the default of True
# is a security concern, you may want to try using the ssh transport.
{{ get_config('pillar_gitfs_ssl_verify', 'True') }}

# The pillar_opts option adds the master configuration file data to a dict in
# the pillar called "master". This is used to set simple configurations in the
# master config file that can then be used on minions.
{{ get_config('pillar_opts', 'True') }}

# The pillar_safe_render_error option prevents the master from passing pillar
# render errors to the minion. This is set on by default because the error could
# contain templating data which would give that minion information it shouldn't
# have, like a password! When set true the error message will only show:
#   Rendering SLS 'my.sls' failed. Please see master log for details.
{{ get_config('pillar_safe_render_error', 'True') }}

# The pillar_source_merging_strategy option allows you to configure merging strategy
# between different sources. It accepts four values: recurse, aggregate, overwrite,
# or smart. Recurse will merge recursively mapping of data. Aggregate instructs
# aggregation of elements between sources that use the #!yamlex renderer. Overwrite
# will verwrite elements according the order in which they are processed. This is
# behavior of the 2014.1 branch and earlier. Smart guesses the best strategy based
# on the "renderer" setting and is the default value.
{{ get_config('pillar_source_merging_strategy', 'smart') }}

# Recursively merge lists by aggregating them instead of replacing them.
{{ get_config('pillar_merge_lists', False) }}

# Git External Pillar (git_pillar) Configuration Options
#
# Specify the provider to be used for git_pillar. Must be either pygit2 or
# gitpython. If unset, then both will be tried in that same order, and the
# first one with a compatible version installed will be the provider that
# is used.
{{ get_config('git_pillar_provider', 'pygit2') }}

# If the desired branch matches this value, and the environment is omitted
# from the git_pillar configuration, then the environment for that git_pillar
# remote will be base.
{{ get_config('git_pillar_base', 'master') }}

# If the branch is omitted from a git_pillar remote, then this branch will
# be used instead.
{{ get_config('git_pillar_branch', 'master') }}

# Environment to use for git_pillar remotes. This is normally derived from
# the branch/tag (or from a per-remote env parameter), but if set this will
# override the process of deriving the env from the branch/tag name.
{{ get_config('git_pillar_env', '') }}

# Path relative to the root of the repository where the git_pillar top file
# and SLS files are located.
{{ get_config('git_pillar_root', 'pillar') }}

# Specifies whether or not to ignore SSL certificate errors when contacting
# the remote repository.
{{ get_config('git_pillar_ssl_verify', True) }}

# When set to False, if there is an update/checkout lock for a git_pillar
# remote and the pid written to it is not running on the master, the lock
# file will be automatically cleared and a new lock will be obtained.
{{ get_config('git_pillar_global_lock', False) }}

# Git External Pillar Authentication Options
#
# Along with git_pillar_password, is used to authenticate to HTTPS remotes.
{{ get_config('git_pillar_user', '') }}

# Along with git_pillar_user, is used to authenticate to HTTPS remotes.
# This parameter is not required if the repository does not use authentication.
{{ get_config('git_pillar_password', '') }}

# By default, Salt will not authenticate to an HTTP (non-HTTPS) remote.
# This parameter enables authentication over HTTP.
{{ get_config('git_pillar_insecure_auth', False) }}

# Along with git_pillar_privkey (and optionally git_pillar_passphrase),
# is used to authenticate to SSH remotes.
{{ get_config('git_pillar_pubkey', '') }}

# Along with git_pillar_pubkey (and optionally git_pillar_passphrase),
# is used to authenticate to SSH remotes.
{{ get_config('git_pillar_privkey', '') }}

# This parameter is optional, required only when the SSH key being used
# to authenticate is protected by a passphrase.
{{ get_config('git_pillar_passphrase', '') }}


######        Security settings       #####
###########################################
# Enable "open mode", this mode still maintains encryption, but turns off
# authentication, this is only intended for highly secure environments or for
# the situation where your keys end up in a bad state. If you run in open mode
# you do so at your own risk!
{{ get_config('open_mode', 'False') }}

# Enable permissive access to the salt keys.  This allows you to run the
# master or minion as root, but have a non-root group be given access to
# your pki_dir.  To make the access explicit, root must belong to the group
# you've given access to. This is potentially quite insecure.
{{ get_config('permissive_pki_access', 'False') }}

# The state_verbose and state_output settings can be used to change the way
# state system data is printed to the display. By default all data is printed.
# The state_verbose setting can be set to True or False, when set to False
# all data that has a result of True and no changes will be suppressed.
{{ get_config('state_verbose', 'True') }}

# The state_output setting changes if the output is the full multi line
# output for each changed state if set to 'full', but if set to 'terse'
# the output will be shortened to a single line.
{{ get_config('state_output', 'full') }}

# The state_output_diff setting changes whether or not the output from
# successful states is returned. Useful when even the terse output of these
# states is cluttering the logs. Set it to True to ignore them.
{{ get_config('state_output_diff', 'False') }}

# The state_output_profile setting changes whether profile information
# will be shown for each state run.
{{ get_config('state_output_profile', 'True') }}

# Fingerprint of the master public key to validate the identity of your Salt master
# before the initial key exchange. The master fingerprint can be found by running
# "salt-key -F master" on the Salt master.
{{ get_config('master_finger', "''") }}


######         Thread settings        #####
###########################################
# Disable multiprocessing support, by default when a minion receives a
# publication a new process is spawned and the command is executed therein.
{{ get_config('multiprocessing', 'True') }}


#####         Logging settings       #####
##########################################
# The location of the minion log file
# The minion log can be sent to a regular file, local path name, or network
# location. Remote logging works best when configured to use rsyslogd(8) (e.g.:
# ``file:///dev/log``), with rsyslogd(8) configured for network logging. The URI
# format is: <file|udp|tcp>://<host|socketpath>:<port-if-required>/<log-facility>
#log_file: /var/log/salt/minion
#log_file: file:///dev/log
#log_file: udp://loghost:10514
#
{{ get_config('log_file', '/var/log/salt/minion') }}
{{ get_config('key_logfile', ' /var/log/salt/key') }}

# The level of messages to send to the console.
# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
#
# The following log levels are considered INSECURE and may log sensitive data:
# ['garbage', 'trace', 'debug']
#
# Default: 'warning'
{{ get_config('log_level', 'warning') }}

# The level of messages to send to the log file.
# One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
# If using 'log_granular_levels' this must be set to the highest desired level.
# Default: 'warning'
{{ get_config('log_level_logfile', '') }}

# The date and time format used in log messages. Allowed date/time formating
# can be seen here: http://docs.python.org/library/time.html#time.strftime
{{ get_config('log_datefmt', "'%H:%M:%S'") }}
{{ get_config('log_datefmt_logfile', "'%Y-%m-%d %H:%M:%S'") }}

# The format of the console logging messages. Allowed formatting options can
# be seen here: http://docs.python.org/library/logging.html#logrecord-attributes
#
# Console log colors are specified by these additional formatters:
#
# %(colorlevel)s
# %(colorname)s
# %(colorprocess)s
# %(colormsg)s
#
# Since it is desirable to include the surrounding brackets, '[' and ']', in
# the coloring of the messages, these color formatters also include padding as
# well.  Color LogRecord attributes are only available for console logging.
#
{{ get_config('log_fmt_console', "'%(colorlevel)s %(colormsg)s'") }}
{{ get_config('log_fmt_console', "'[%(levelname)-8s] %(message)s'") }}
#
{{ get_config('log_fmt_logfile', "'%(asctime)s,%(msecs)03.0f [%(name)-17s][%(levelname)-8s] %(message)s'") }}

# This can be used to control logging levels more specificically.  This
# example sets the main salt library at the 'warning' level, but sets
# 'salt.modules' to log at the 'debug' level:
#   log_granular_levels:
#     'salt': 'warning'
#     'salt.modules': 'debug'
#
{{ get_config('log_granular_levels', '{}') }}

# To diagnose issues with minions disconnecting or missing returns, ZeroMQ
# supports the use of monitor sockets to log connection events. This
# feature requires ZeroMQ 4.0 or higher.
#
# To enable ZeroMQ monitor sockets, set 'zmq_monitor' to 'True' and log at a
# debug level or higher.
#
# A sample log event is as follows:
#
# [DEBUG   ] ZeroMQ event: {'endpoint': 'tcp://127.0.0.1:4505', 'event': 512,
# 'value': 27, 'description': 'EVENT_DISCONNECTED'}
#
# All events logged will include the string 'ZeroMQ event'. A connection event
# should be logged as the minion starts up and initially connects to the
# master. If not, check for debug log level and that the necessary version of
# ZeroMQ is installed.
#
{{ get_config('zmq_monitor', 'False') }}

######      Module configuration      #####
###########################################
# Salt allows for modules to be passed arbitrary configuration data, any data
# passed here in valid yaml format will be passed on to the salt minion modules
# for use. It is STRONGLY recommended that a naming convention be used in which
# the module name is followed by a . and then the value. Also, all top level
# data must be applied via the yaml dict construct, some examples:
#
# You can specify that all modules should run in test mode:
{{ get_config('test', 'True') }}

# A simple value for the test module:
#test.foo: foo
#
# A list for the test module:
#test.bar: [baz,quo]
#
# A dict for the test module:
#test.baz: {spam: sausage, cheese: bread}
#


{%- if 'module_config' in cfg_minion %}
{%- do default_keys.append('module_config') %}
    {%- for modkey, modval in cfg_minion.module_config.items() %}
{{ modkey }}: {{ modval }}
    {%- endfor %}
{%- endif %}

#
######      Update settings          ######
###########################################
# Using the features in Esky, a salt minion can both run as a frozen app and
# be updated on the fly. These options control how the update process
# (saltutil.update()) behaves.
#
# The url for finding and downloading updates. Disabled by default.
{{ get_config('update_url', 'False') }}
#
# The list of services to restart after a successful update. Empty by default.
{{ get_config('update_restart_services', '[]') }}


######      Keepalive settings        ######
############################################
# ZeroMQ now includes support for configuring SO_KEEPALIVE if supported by
# the OS. If connections between the minion and the master pass through
# a state tracking device such as a firewall or VPN gateway, there is
# the risk that it could tear down the connection the master and minion
# without informing either party that their connection has been taken away.
# Enabling TCP Keepalives prevents this from happening.

# Overall state of TCP Keepalives, enable (1 or True), disable (0 or False)
# or leave to the OS defaults (-1), on Linux, typically disabled. Default True, enabled.
{{ get_config('tcp_keepalive', 'True') }}

# How long before the first keepalive should be sent in seconds. Default 300
# to send the first keepalive after 5 minutes, OS default (-1) is typically 7200 seconds
# on Linux see /proc/sys/net/ipv4/tcp_keepalive_time.
{{ get_config('tcp_keepalive_idle', '300') }}

# How many lost probes are needed to consider the connection lost. Default -1
# to use OS defaults, typically 9 on Linux, see /proc/sys/net/ipv4/tcp_keepalive_probes.
{{ get_config('tcp_keepalive_cnt', '-1') }}

# How often, in seconds, to send keepalives after the first one. Default -1 to
# use OS defaults, typically 75 seconds on Linux, see
# /proc/sys/net/ipv4/tcp_keepalive_intvl.
{{ get_config('tcp_keepalive_intvl', '-1') }}

######   Windows Software settings    ######
############################################
# Location of the repository cache file on the master:
{{ get_config('win_repo_cachefile', 'salt://win/repo/winrepo.p') }}

######      Returner  settings        ######
############################################
# Which returner(s) will be used for minion's result:
{{ get_config('return', '') }}

######    Miscellaneous  settings     ######
############################################
# Default match type for filtering events tags: startswith, endswith, find, regex, fnmatch
#event_match_type: startswith
{{ get_config('event_match_type', 'startswith') }}

{% if 'mongo' in cfg_minion -%}
{%- do default_keys.append('mongo') %}
#####   mongodb connection settings  #####
##########################################
{%- for name, value in cfg_minion['mongo'].items() %}
mongo.{{ name }}: {{ value }}
{%- endfor %}

{% if 'alternative.mongo' in cfg_minion -%}
{%- do default_keys.append('alternative.mongo') %}
{%- for name, value in cfg_minion['alternative.mongo'].items() %}
alternative.mongo.{{ name }}: {{ value }}
{%- endfor %}
{% endif %}
{%- endif %}

{%- for configname in cfg_minion %}
{%- if configname not in reserved_keys and configname not in default_keys %}
{{ configname }}: {{ cfg_minion[configname]|json }}
{%- endif %}
{%- endfor %}