The user will already have it's /etc/salt/minion file, so it doesn't need all this info, and it makes easier to know what has been generated and what not

9 лет назад · 4344a1311b
--- a/salt/files/minion.d/f_defaults.conf
+++ b/salt/files/minion.d/f_defaults.conf
@@ -16,14 +16,10 @@
 ##### Primary configuration settings #####
 ##########################################

 # Per default the minion will automatically include all config files
 # from minion.d/*.conf (minion.d is a directory in the same directory
 # as the main minion config file).
 # minion includes
 {{ get_config('default_include', 'minion.d/*.conf') }}

 # Set the location of the salt master server. If the master server cannot be
 # resolved, then the minion will fail to start.
 # master:salt
 # master configs
 {%- if 'master' in cfg_minion -%}
 {%- if cfg_minion['master'] is not string %}
 master:
@@ -44,147 +40,87 @@ master:
 {%- endif -%}
 {%- endif %}

 # If multiple masters are specified in the 'master' setting, the default behavior
 # is to always try to connect to them in the order they are listed. If random_master is
 # set to True, the order will be randomized instead. This can be helpful in distributing
 # the load of many minions executing salt-call requests, for example, from a cron job.
 # If only one master is listed, this setting is ignored and a warning will be logged.
 # choose a random master
 {{ get_config('random_master', 'False') }}

 # Set whether the minion should connect to the master via IPv6:
 # use IPv6
 {{ get_config('ipv6', 'False') }}

 # Set the number of seconds to wait before attempting to resolve
 # the master hostname if name resolution fails. Defaults to 30 seconds.
 # Set to zero if the minion should shutdown and not retry.
 # name resolution retries
 {{ get_config('retry_dns', '30') }}

 # Set the port used by the master reply and authentication server.
 # master port
 {{ get_config('master_port', '4506') }}

 # The user to run salt.
 # user to run salt.
 {{ get_config('user', 'root') }}

 # Specify the location of the daemon process ID file.
 # PID file
 {{ get_config('pidfile', '/var/run/salt-minion.pid') }}

 # The root directory prepended to these options: pki_dir, cachedir, log_file,
 # sock_dir, pidfile.
 # root dir
 {{ get_config('root_dir', '/') }}

 # The directory to store the pki information in
 # pki dir
 {{ get_config('pki_dir', '/etc/salt/pki/minion') }}

 # Explicitly declare the id for this minion to use, if left commented the id
 # will be the hostname as returned by the python call: socket.getfqdn()
 # Since salt uses detached ids it is possible to run multiple minions on the
 # same machine but with different ids, this can be useful for salt compute
 # clusters.
 # minion id
 {% if 'id' in cfg_minion -%}
 id: {{ cfg_minion['id'] }}
 {% else -%}
 #id:
 {%- endif %}

 # Append a domain to a hostname in the event that it does not exist.  This is
 # useful for systems where socket.getfqdn() does not actually result in a
 # FQDN (for instance, Solaris).
 # domain name for hostnames
 {{ get_config('append_domain', '') }}

 # Custom static grains for this minion can be specified here and used in SLS
 # files just like all other grains. This example sets 4 custom grains, with
 # the 'roles' grain having two values that can be matched against.
 #grains:
 #  roles:
 #    - webserver
 #    - memcache
 #  deployment: datacenter4
 #  cabinet: 13
 #  cab_u: 14-15
 # custom grains
 {{ get_config('grains', '{}') }}

 # Where cache data goes.
 # cache location
 {{ get_config('cachedir', '/var/cache/salt/minion') }}

 # Verify and set permissions on configuration directories at startup.
 # environment verification
 {{ get_config('verify_env', 'True') }}

 # The minion can locally cache the return data from jobs sent to it, this
 # can be a good way to keep track of jobs the minion has executed
 # (on the minion side). By default this feature is disabled, to enable, set
 # cache_jobs to True.
 # cache executed jobs
 {{ get_config('cache_jobs', 'False') }}

 # Set the directory used to hold unix sockets.
 # unix socket location
 {{ get_config('sock_dir', '/var/run/salt/minion') }}

 # Set the default outputter used by the salt-call command. The default is
 # "nested".
 # output formatter
 {{ get_config('output', 'nested') }}
 #
 # By default output is colored. To disable colored output, set the color value
 # to False.
 # output color
 {{ get_config('color', 'True') }}

 # Do not strip off the colored output from nested results and state outputs
 # (true by default).
 # remove nested color
 {{ get_config('strip_colors', 'False') }}

 # Backup files that are replaced by file.managed and file.recurse under
 # 'cachedir'/file_backups relative to their original location and appended
 # with a timestamp. The only valid setting is "minion". Disabled by default.
 #
 # Alternatively this can be specified for each file in state files:
 # /etc/ssh/sshd_config:
 #   file.managed:
 #     - source: salt://ssh/sshd_config
 #     - backup: minion
 #
 # backup modified files
 {{ get_config('backup_mode', 'minion') }}

 # When waiting for a master to accept the minion's public key, salt will
 # continuously attempt to reconnect until successful. This is the time, in
 # seconds, between those reconnection attempts.
 # key acceptance time
 {{ get_config('acceptance_wait_time', '10') }}

 # If this is nonzero, the time between reconnection attempts will increase by
 # acceptance_wait_time seconds per iteration, up to this maximum. If this is
 # set to zero, the time between reconnection attempts will stay constant.
 # maximum acceptance wait
 {{ get_config('acceptance_wait_time_max', '0') }}

 # If the master rejects the minion's public key, retry instead of exiting.
 # Rejected keys will be handled the same as waiting on acceptance.
 # retry key
 {{ get_config('rejected_retry', 'False') }}

 # When the master key changes, the minion will try to re-auth itself to receive
 # the new master key. In larger environments this can cause a SYN flood on the
 # master because all minions try to re-auth immediately. To prevent this and
 # have a minion wait for a random amount of time, use this optional parameter.
 # The wait-time will be a random number of seconds between 0 and the defined value.
 # time to wait for trying reauth
 {{ get_config('random_reauth_delay', '60') }}

 # When waiting for a master to accept the minion's public key, salt will
 # continuously attempt to reconnect until successful. This is the timeout value,
 # in seconds, for each individual attempt. After this timeout expires, the minion
 # will wait for acceptance_wait_time seconds before trying again. Unless your master
 # is under unusually heavy load, this should be left at the default.
 # auth wait timeout
 {{ get_config('auth_timeout', '60') }}

 # Number of consecutive SaltReqTimeoutError that are acceptable when trying to
 # authenticate.
 # auth retries
 {{ get_config('auth_tries', '7') }}

 # If authentication fails due to SaltReqTimeoutError during a ping_interval,
 # cause sub minion process to restart.
 # retry auth if ping failed
 {{ get_config('auth_safemode', 'False') }}

 # Ping Master to ensure connection is alive (minutes).
 # master ping interval
 {{ get_config('ping_interval', '0') }}

 # The Salt Mine functions are executed when the minion starts and at a given interval by the scheduler.
 # The default interval is every 60 minutes.
 # salt mine functions execution interval
 {{ get_config('mine_interval', '60') }}

 # mine functions
 {%- if 'mine_functions' in cfg_minion %}
 mine_functions:
 {%- for func, args in cfg_minion['mine_functions'].items() %}
@@ -192,136 +128,34 @@ mine_functions:
 {%- endfor %}
 {%- endif %}

 # To auto recover minions if master changes IP address (DDNS)
 #    auth_tries: 10
 #    auth_safemode: False
 #    ping_interval: 90
 #    restart_on_error: True
 #
 # Minions won't know master is missing until a ping fails. After the ping fail,
 # the minion will attempt authentication and likely fails out and cause a restart.
 # When the minion restarts it will resolve the masters IP and attempt to reconnect.

 # If you don't have any problems with syn-floods, don't bother with the
 # three recon_* settings described below, just leave the defaults!
 #
 # The ZeroMQ pull-socket that binds to the masters publishing interface tries
 # to reconnect immediately, if the socket is disconnected (for example if
 # the master processes are restarted). In large setups this will have all
 # minions reconnect immediately which might flood the master (the ZeroMQ-default
 # is usually a 100ms delay). To prevent this, these three recon_* settings
 # can be used.
 # recon_default: the interval in milliseconds that the socket should wait before
 #                trying to reconnect to the master (1000ms = 1 second)
 #
 # recon_max: the maximum time a socket should wait. each interval the time to wait
 #            is calculated by doubling the previous time. if recon_max is reached,
 #            it starts again at recon_default. Short example:
 #
 #            reconnect 1: the socket will wait 'recon_default' milliseconds
 #            reconnect 2: 'recon_default' * 2
 #            reconnect 3: ('recon_default' * 2) * 2
 #            reconnect 4: value from previous interval * 2
 #            reconnect 5: value from previous interval * 2
 #            reconnect x: if value >= recon_max, it starts again with recon_default
 #
 # recon_randomize: generate a random wait time on minion start. The wait time will
 #                  be a random value between recon_default and recon_default +
 #                  recon_max. Having all minions reconnect with the same recon_default
 #                  and recon_max value kind of defeats the purpose of being able to
 #                  change these settings. If all minions have the same values and your
 #                  setup is quite large (several thousand minions), they will still
 #                  flood the master. The desired behavior is to have timeframe within
 #                  all minions try to reconnect.
 #
 # Example on how to use these settings. The goal: have all minions reconnect within a
 # 60 second timeframe on a disconnect.
 # recon_default: 1000
 # recon_max: 59000
 # recon_randomize: True
 #
 # Each minion will have a randomized reconnect value between 'recon_default'
 # and 'recon_default + recon_max', which in this example means between 1000ms
 # 60000ms (or between 1 and 60 seconds). The generated random-value will be
 # doubled after each attempt to reconnect. Lets say the generated random
 # value is 11 seconds (or 11000ms).
 # reconnect 1: wait 11 seconds
 # reconnect 2: wait 22 seconds
 # reconnect 3: wait 33 seconds
 # reconnect 4: wait 44 seconds
 # reconnect 5: wait 55 seconds
 # reconnect 6: wait time is bigger than 60 seconds (recon_default + recon_max)
 # reconnect 7: wait 11 seconds
 # reconnect 8: wait 22 seconds
 # reconnect 9: wait 33 seconds
 # reconnect x: etc.
 #
 # In a setup with ~6000 thousand hosts these settings would average the reconnects
 # to about 100 per second and all hosts would be reconnected within 60 seconds.
 # reconnection parameters
 {{ get_config('recon_default', '100') }}
 {{ get_config('recon_max', '5000') }}
 {{ get_config('recon_randomize', 'False') }}

 # The loop_interval sets how long in seconds the minion will wait between
 # evaluating the scheduler and running cleanup tasks. This defaults to a
 # sane 60 seconds, but if the minion scheduler needs to be evaluated more
 # often lower this value
 # minion scheduler interval
 {{ get_config('loop_interval', '60') }}

 # The grains_refresh_every setting allows for a minion to periodically check
 # its grains to see if they have changed and, if so, to inform the master
 # of the new grains. This operation is moderately expensive, therefore
 # care should be taken not to set this value too low.
 #
 # Note: This value is expressed in __minutes__!
 #
 # A value of 10 minutes is a reasonable default.
 #
 # If the value is set to zero, this check is disabled.
 # grain refresh interval
 {{ get_config('grains_refresh_every', '1') }}

 # Cache grains on the minion. Default is False.
 # cache grains in minion
 {{ get_config('grains_cache', 'False') }}

 # Grains cache expiration, in seconds. If the cache file is older than this
 # number of seconds then the grains cache will be dumped and fully re-populated
 # with fresh data. Defaults to 5 minutes. Will have no effect if 'grains_cache'
 # is not enabled.
 # grains cache expiration interval
 {{ get_config('grains_cache_expiration', '300') }}

 # Windows platforms lack posix IPC and must rely on slower TCP based inter-
 # process communications. Set ipc_mode to 'tcp' on such systems
 # ipc method
 {{ get_config('ipc_mode', 'ipc') }}

 # Overwrite the default tcp ports used by the minion when in tcp mode
 # ipc tcp ports
 {{ get_config('tcp_pub_port', '4510') }}
 {{ get_config('tcp_pull_port', '4511') }}

 # Passing very large events can cause the minion to consume large amounts of
 # memory. This value tunes the maximum size of a message allowed onto the
 # minion event bus. The value is expressed in bytes.
 # max event size in minion bus
 {{ get_config('max_event_size', '1048576') }}

 # To detect failed master(s) and fire events on connect/disconnect, set
 # master_alive_interval to the number of seconds to poll the masters for
 # connection events.
 #
 # master check alive interval
 {{ get_config('master_alive_interval', '30') }}

 # The minion can include configuration from other files. To enable this,
 # pass a list of paths to this option. The paths can be either relative or
 # absolute; if relative, they are considered to be relative to the directory
 # the main minion configuration file lives in (this file). Paths can make use
 # of shell-style globbing. If no files are matched by a path passed to this
 # option then the minion will log a warning message.
 #
 # Include a config file from some other path:
 # include: /etc/salt/extra_config
 #
 # Include config from several files and directories:
 #include:
 #  - /etc/salt/extra_config
 #  - /etc/roles/webserver
 # include extra config
 {% if 'include' in cfg_minion -%}
    {% if isinstance(cfg_minion['include'], list) -%}
        include:
@@ -345,169 +179,69 @@ mine_functions:

 #####   Minion module management     #####
 ##########################################
 # Disable specific modules. This allows the admin to limit the level of
 # access the master has to the minion.
 # disable modules
 {{ get_config('disable_modules', '[cmd,test]') }}
 {{ get_config('disable_returners', '[]') }}
 #
 # Modules can be loaded from arbitrary paths. This enables the easy deployment
 # of third party modules. Modules for returners and minions can be loaded.
 # Specify a list of extra directories to search for minion modules and
 # returners. These paths must be fully qualified!
 # minion modules search paths
 {{ get_config('module_dirs', '[]') }}
 {{ get_config('returner_dirs', '[]') }}
 {{ get_config('states_dirs', '[]') }}
 {{ get_config('render_dirs', '[]') }}
 {{ get_config('utils_dirs', '[]') }}
 #
 # A module provider can be statically overwritten or extended for the minion
 # via the providers option, in this case the default module will be
 # overwritten by the specified module. In this example the pkg module will
 # be provided by the yumpkg5 module instead of the system default.
 #providers:
 #  pkg: yumpkg5
 # module overrides
 {{ get_config('providers', '{}') }}
 #
 # Enable Cython modules searching and loading. (Default: False)
 # enable cython modules
 {{ get_config('cython_enable', 'False') }}
 #
 # Specify a max size (in bytes) for modules on import. This feature is currently
 # only supported on *nix operating systems and requires psutil.
 # max module size
 {{ get_config('modules_max_memory', '-1') }}


 #####    State Management Settings    #####
 ###########################################
 # The state management system executes all of the state templates on the minion
 # to enable more granular control of system state management. The type of
 # template and serialization used for state management needs to be configured
 # on the minion, the default renderer is yaml_jinja. This is a yaml file
 # rendered from a jinja template, the available options are:
 # yaml_jinja
 # yaml_mako
 # yaml_wempy
 # json_jinja
 # json_mako
 # json_wempy
 #
 # renderer selection
 {{ get_config('renderer', 'yaml_jinja') }}
 #
 # The failhard option tells the minions to stop immediately after the first
 # failure detected in the state execution. Defaults to False.
 # fail on first failure
 {{ get_config('failhard', 'False') }}
 #
 # autoload_dynamic_modules turns on automatic loading of modules found in the
 # environments on the master. This is turned on by default. To turn of
 # autoloading modules when states run, set this value to False.
 # auto reload dynamic modules
 {{ get_config('autoload_dynamic_modules', 'True') }}
 #
 # clean_dynamic_modules keeps the dynamic modules on the minion in sync with
 # the dynamic modules on the master, this means that if a dynamic module is
 # not on the master it will be deleted from the minion. By default, this is
 # enabled and can be disabled by changing this value to False.
 # sync dynamic modules with deletion
 {{ get_config('clean_dynamic_modules', 'True') }}
 #
 # Normally, the minion is not isolated to any single environment on the master
 # when running states, but the environment can be isolated on the minion side
 # by statically setting it. Remember that the recommended way to manage
 # environments is to isolate via the top file.
 # minion accepted environment
 {{ get_config('environment', 'None') }}
 #
 # If using the local file directory, then the state top file name needs to be
 # defined, by default this is top.sls.
 # top state file
 {{ get_config('state_top', 'top.sls') }}
 #
 # Run states when the minion daemon starts. To enable, set startup_states to:
 # 'highstate' -- Execute state.highstate
 # 'sls' -- Read in the sls_list option and execute the named sls files
 # 'top' -- Read top_file option and execute based on that file on the Master
 # states to run in minion daemon
 {{ get_config('startup_states', "''") }}
 #
 # List of states to run when the minion starts up if startup_states is 'sls':
 #sls_list:
 #  - edit.vim
 #  - hyper
 # sls states to run
 {{ get_config('sls_list', '[]') }}
 #
 # Top file to execute if startup_states is 'top':
 # top file to run
 {{ get_config('top_file', "''") }}

 # Automatically aggregate all states that have support for mod_aggregate by
 # setting to True. Or pass a list of state module names to automatically
 # aggregate just those types.
 #
 # state_aggregate:
 #   - pkg
 #
 #state_aggregate: False

 #####     File Directory Settings    #####
 ##########################################
 # The Salt Minion can redirect all file server operations to a local directory,
 # this allows for the same state tree that is on the master to be used if
 # copied completely onto the minion. This is a literal copy of the settings on
 # the master but used to reference a local directory on the minion.

 # Set the file client. The client defaults to looking on the master server for
 # files, but can be directed to look at the local file directory setting
 # defined below by setting it to local.
 # file client location
 {%- if standalone %}
 file_client: local
 {%- else %}
 {{ get_config('file_client', 'remote') }}
 {%- endif %}

 # The file directory works on environments passed to the minion, each environment
 # can have multiple root directories, the subdirectories in the multiple file
 # roots cannot match, otherwise the downloaded files will not be able to be
 # reliably ensured. A base environment is required to house the top file.
 # Example:
 # file_roots:
 #   base:
 #     - /srv/salt/
 #   dev:
 #     - /srv/salt/dev/services
 #     - /srv/salt/dev/states
 #   prod:
 #     - /srv/salt/prod/services
 #     - /srv/salt/prod/states
 #
 # environment file roots
 {% if 'file_roots' in cfg_minion -%}
 {{ file_roots(cfg_minion['file_roots']) }}
 {%- elif 'file_roots' in cfg_salt -%}
 {{ file_roots(cfg_salt['file_roots']) }}
 {%- elif formulas|length -%}
 {{ file_roots({'base': ['/srv/salt']}) }}
 {%- else -%}
 #file_roots:
 #  base:
 #    - /srv/salt
 {%- endif %}

 # By default, the Salt fileserver recurses fully into all defined environments
 # to attempt to find files. To limit this behavior so that the fileserver only
 # traverses directories with SLS files and special Salt directories like _modules,
 # enable the option below. This might be useful for installations where a file root
 # has a very large number of files and performance is negatively impacted. Default
 # is False.
 # limit fileserver traversal
 {{ get_config('fileserver_limit_traversal', 'False') }}

 #
 # Git fileserver backend configuration
 #
 # Gitfs can be provided by one of two python modules: GitPython or pygit2. If
 # using pygit2, both libgit2 and git must also be installed.
 # gitfs provider
 {{ get_config('gitfs_provider', 'pygit2') }}
 #
 # When using the git fileserver backend at least one git remote needs to be
 # defined. The user running the salt master will need read access to the repo.
 #
 # The repos will be searched in order to find the file requested by a client
 # and the first repo to have the file will return it.
 # When using the git backend branches and tags are translated into salt
 # environments.
 # Note:  file:// repos will be treated as a remote, so refs you want used must
 # exist in that repo as *local* refs.
 # gitfs remotes
 {% if 'gitfs_remotes' in cfg_minion -%}
 gitfs_remotes:
 {%- for remote in cfg_minion['gitfs_remotes'] %}
@@ -525,34 +259,15 @@ gitfs_remotes:
 {%- endif -%}
 {%- endfor -%}
 {%- endif %}
 #
 #gitfs_remotes:
 #  - git://github.com/saltstack/salt-states.git
 #  - file:///var/git/saltmaster
 #
 # The gitfs_ssl_verify option specifies whether to ignore ssl certificate
 # errors when contacting the gitfs backend. You might want to set this to
 # false if you're using a git backend that uses a self-signed certificate but
 # keep in mind that setting this flag to anything other than the default of True
 # is a security concern, you may want to try using the ssh transport.
 # verify git ssl errors
 {{ get_config('gitfs_ssl_verify', 'True') }}
 
 # The gitfs_root option gives the ability to serve files from a subdirectory
 # within the repository. The path is defined relative to the root of the
 # repository and defaults to the repository root.
 # gitfs root dir
 {{ get_config('gitfs_root', 'somefolder/otherfolder') }}
 
 # The hash_type is the hash to use when discovering the hash of a file in
 # the local fileserver. The default is md5, but sha1, sha224, sha256, sha384
 # and sha512 are also supported.
 #
 # Warning: Prior to changing this value, the minion should be stopped and all
 # Salt caches should be cleared.

 # file hash method
 {{ get_config('hash_type', 'md5') }}

 # The Salt pillar is searched for locally if file_client is set to local. If
 # this is the case, and pillar data is defined, then the pillar_roots need to
 # also be configured on the minion:
 # pillar roots
 {% if 'pillar_roots' in cfg_minion -%}
 pillar_roots:
 {%- for name, roots in cfg_minion['pillar_roots']|dictsort %}
@@ -569,119 +284,58 @@ pillar_roots:
    - {{ dir }}
 {%- endfor -%}
 {%- endfor -%}
 {% else -%}
 #pillar_roots:
 #  base:
 #    - /srv/salt
 {%- endif %}


 ######        Security settings       #####
 ###########################################
 # Enable "open mode", this mode still maintains encryption, but turns off
 # authentication, this is only intended for highly secure environments or for
 # the situation where your keys end up in a bad state. If you run in open mode
 # you do so at your own risk!
 # disable authentication
 {{ get_config('open_mode', 'False') }}

 # Enable permissive access to the salt keys.  This allows you to run the
 # master or minion as root, but have a non-root group be given access to
 # your pki_dir.  To make the access explicit, root must belong to the group
 # you've given access to. This is potentially quite insecure.
 # allow access to pki dir
 {{ get_config('permissive_pki_access', 'False') }}

 # The state_verbose and state_output settings can be used to change the way
 # state system data is printed to the display. By default all data is printed.
 # The state_verbose setting can be set to True or False, when set to False
 # all data that has a result of True and no changes will be suppressed.
 # print verbose changes
 {{ get_config('state_verbose', 'True') }}

 # The state_output setting changes if the output is the full multi line
 # output for each changed state if set to 'full', but if set to 'terse'
 # the output will be shortened to a single line.
 # multi line output
 {{ get_config('state_output', 'full') }}

 # The state_output_diff setting changes whether or not the output from
 # successful states is returned. Useful when even the terse output of these
 # states is cluttering the logs. Set it to True to ignore them.
 # output diff
 {{ get_config('state_output_diff', 'False') }}

 # Fingerprint of the master public key to double verify the master is valid,
 # the master fingerprint can be found by running "salt-key -F master" on the
 # salt master.
 # master fingerprint
 {{ get_config('master_finger', "''") }}

 ######         Thread settings        #####
 ###########################################
 # Disable multiprocessing support, by default when a minion receives a
 # publication a new process is spawned and the command is executed therein.
 # enable multiprocessing
 {{ get_config('multiprocessing', 'True') }}


 #####         Logging settings       #####
 ##########################################
 # The location of the minion log file
 # The minion log can be sent to a regular file, local path name, or network
 # location. Remote logging works best when configured to use rsyslogd(8) (e.g.:
 # ``file:///dev/log``), with rsyslogd(8) configured for network logging. The URI
 # format is: <file|udp|tcp>://<host|socketpath>:<port-if-required>/<log-facility>
 #log_file: /var/log/salt/minion
 #log_file: file:///dev/log
 #log_file: udp://loghost:10514
 #
 # log file and log lock file location
 {{ get_config('log_file', '/var/log/salt/minion') }}
 {{ get_config('key_logfile', ' /var/log/salt/key') }}

 # The level of messages to send to the console.
 # One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
 # Default: 'warning'
 # console log level
 {{ get_config('log_level', 'warning') }}

 # The level of messages to send to the log file.
 # One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
 # If using 'log_granular_levels' this must be set to the highest desired level.
 # Default: 'warning'
 # logfile log level
 {{ get_config('log_level_logfile', '') }}

 # The date and time format used in log messages. Allowed date/time formating
 # can be seen here: http://docs.python.org/library/time.html#time.strftime
 # datetime format for console and logfile
 {{ get_config('log_datefmt', "'%H:%M:%S'") }}
 {{ get_config('log_datefmt_logfile', "'%Y-%m-%d %H:%M:%S'") }}

 # The format of the console logging messages. Allowed formatting options can
 # be seen here: http://docs.python.org/library/logging.html#logrecord-attributes
 # log format for console and logfiles
 {{ get_config('log_fmt_console', "'[%(levelname)-8s] %(message)s'") }}
 {{ get_config('log_fmt_logfile', "'%(asctime)s,%(msecs)03.0f [%(name)-17s][%(levelname)-8s] %(message)s'") }}

 # This can be used to control logging levels more specificically.  This
 # example sets the main salt library at the 'warning' level, but sets
 # 'salt.modules' to log at the 'debug' level:
 #   log_granular_levels:
 #     'salt': 'warning'
 #     'salt.modules': 'debug'
 #
 # log particular modules
 {{ get_config('log_granular_levels', '{}') }}


 ######      Module configuration      #####
 ###########################################
 # Salt allows for modules to be passed arbitrary configuration data, any data
 # passed here in valid yaml format will be passed on to the salt minion modules
 # for use. It is STRONGLY recommended that a naming convention be used in which
 # the module name is followed by a . and then the value. Also, all top level
 # data must be applied via the yaml dict construct, some examples:
 #
 # You can specify that all modules should run in test mode:
 #test: True
 #
 # A simple value for the test module:
 #test.foo: foo
 #
 # A list for the test module:
 #test.bar: [baz,quo]
 #
 # A dict for the test module:
 #test.baz: {spam: sausage, cheese: bread}
 # module parameters
 {%- if 'module_config' in cfg_minion %}
 {%- for modkey, modval in cfg_minion.module_config.items() %}
 {{ modkey }}: {{ modval }}
@@ -691,51 +345,25 @@ pillar_roots:

 ######      Update settings          ######
 ###########################################
 # Using the features in Esky, a salt minion can both run as a frozen app and
 # be updated on the fly. These options control how the update process
 # (saltutil.update()) behaves.
 #
 # The url for finding and downloading updates. Disabled by default.
 # update url
 {{ get_config('update_url', 'False') }}
 #
 # The list of services to restart after a successful update. Empty by default.
 # services to restart after update
 {{ get_config('update_restart_services', '[]') }}


 ######      Keepalive settings        ######
 ############################################
 # ZeroMQ now includes support for configuring SO_KEEPALIVE if supported by
 # the OS. If connections between the minion and the master pass through
 # a state tracking device such as a firewall or VPN gateway, there is
 # the risk that it could tear down the connection the master and minion
 # without informing either party that their connection has been taken away.
 # Enabling TCP Keepalives prevents this from happening.

 # Overall state of TCP Keepalives, enable (1 or True), disable (0 or False)
 # or leave to the OS defaults (-1), on Linux, typically disabled. Default True, enabled.
 # use tcp keepalive
 {{ get_config('tcp_keepalive', 'True') }}

 # How long before the first keepalive should be sent in seconds. Default 300
 # to send the first keepalive after 5 minutes, OS default (-1) is typically 7200 seconds
 # on Linux see /proc/sys/net/ipv4/tcp_keepalive_time.
 # first keepalive from idle
 {{ get_config('tcp_keepalive_idle', '300') }}

 # How many lost probes are needed to consider the connection lost. Default -1
 # to use OS defaults, typically 9 on Linux, see /proc/sys/net/ipv4/tcp_keepalive_probes.
 # keepalive number for connection lost
 {{ get_config('tcp_keepalive_cnt', '-1') }}

 # How often, in seconds, to send keepalives after the first one. Default -1 to
 # use OS defaults, typically 75 seconds on Linux, see
 # /proc/sys/net/ipv4/tcp_keepalive_intvl.
 # keepalive interval
 {{ get_config('tcp_keepalive_intvl', '-1') }}


 ######      Windows Software settings ######
 ############################################
 # Location of the repository cache file on the master:
 # windows repo cache
 {{ get_config('win_repo_cachefile', 'salt://win/repo/winrepo.p') }}

 ######      Returner  settings        ######
 ############################################
 # Which returner(s) will be used for minion's result:
 #return: mysql