feat(tofs): switch to tofs

test/integration/ufw/controls/config_spec.rb

@@ -0,0 +1,68 @@
+control 'UFW configuration' do
+
+  title 'Test UFW configuration'
+
+  describe directory('/etc/ufw') do
+    it { should exist }
+  end
+
+  describe file('/etc/ufw/ufw.conf') do
+    its('content') { should include 'ENABLED=' }
+    its('content') { should include 'LOGLEVEL=' }
+  end
+
+  describe command('ufw status verbose | grep Status') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /active/ }
+  end
+
+  describe command('ufw status verbose | grep Logging') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /low/ }
+  end
+
+  describe command('ufw status | grep MySQL') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /ALLOW/ }
+  end
+
+  describe command('ufw status | grep Postgresql') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /LIMIT/ }
+  end
+
+  describe command('ufw status | grep SSH223') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /DENY/ }
+  end
+
+  describe command('ufw status | grep 10.0.0.0') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /DENY/ }
+  end
+
+  describe command('ufw status | grep 22/tcp') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /LIMIT/ }
+  end
+
+  describe command('ufw status | grep 80/tcp') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /DENY/ }
+  end
+
+  describe command('ufw status | grep 443/tcp') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /ALLOW/ }
+  end
+
+  describe command('ufw status | grep 10.0.0.1') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /DENY/ }
+  end
+
+  describe command('ufw status | grep 10.0.0.2') do
+    its('exit_status') { should eq 0 }
+    its('stdout') { should match /DENY/ }
+  end
+end

test/integration/ufw/controls/package_spec.rb

@@ -0,0 +1,7 @@
+control 'UFW package' do
+  title 'should be installed'
+
+  describe package('ufw') do
+    it { should be_installed }
+  end
+end

test/integration/ufw/controls/ufw.rb

@@ -1,71 +0,0 @@
-# encoding: utf-8
-
-title 'Test Ufw installation'
-
-describe package('ufw') do
-  it { should be_installed }
-end
-
-describe directory('/etc/ufw') do
-  it { should exist }
-end
-
-describe file('/etc/ufw/ufw.conf') do
-  its('content') { should include 'ENABLED=' }
-  its('content') { should include 'LOGLEVEL=' }
-end
-
-describe command('ufw status verbose | grep Status') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /active/ }
-end
-
-describe command('ufw status verbose | grep Logging') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /low/ }
-end
-
-describe command('ufw status | grep MySQL') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /ALLOW/ }
-end
-
-describe command('ufw status | grep Postgresql') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /LIMIT/ }
-end
-
-describe command('ufw status | grep SSH223') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /DENY/ }
-end
-
-describe command('ufw status | grep 10.0.0.0') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /DENY/ }
-end
-
-describe command('ufw status | grep 22/tcp') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /LIMIT/ }
-end
-
-describe command('ufw status | grep 80/tcp') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /DENY/ }
-end
-
-describe command('ufw status | grep 443/tcp') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /ALLOW/ }
-end
-
-describe command('ufw status | grep 10.0.0.1') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /DENY/ }
-end
-
-describe command('ufw status | grep 10.0.0.2') do
-  its('exit_status') { should eq 0 }
-  its('stdout') { should match /DENY/ }
-end

ufw/config/applications.sls

@@ -0,0 +1,49 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- set sls_package_install = tplroot ~ '.package.install' %}
+{%- set sls_enable_service  = tplroot ~ '.service.enable' %}
+{%- set sls_reload_service  = tplroot ~ '.service.reload' %}
+{%- from tplroot ~ "/map.jinja" import ufw with context %}
+
+include:
+  - {{ sls_package_install }}
+  - {{ sls_enable_service }}
+  - {{ sls_reload_service }}
+
+# Applications
+{%- for app_name, app_details in ufw.get('applications', {}).items() %}
+
+  {%- set from_addr_raw = app_details.get('from_addr', [None]) %}
+  {%- set from_addrs = [from_addr_raw] if from_addr_raw is string else from_addr_raw %}
+
+  {%- for from_addr in from_addrs %}
+    {%- set deny    = app_details.get('deny', None) %}
+    {%- set limit   = app_details.get('limit', None) %}
+    {%- set method  = 'deny' if deny else ('limit' if limit else 'allow') %}
+    {%- set to_addr = app_details.get('to_addr', None) %}
+    {%- set comment = app_details.get('comment', None) %}
+
+{%- if from_addr is not none %}
+ufw-app-{{method}}-{{app_name}}-{{from_addr}}:
+{%- else %}
+ufw-app-{{method}}-{{app_name}}:
+{%- endif %}
+  ufw.{{method}}:
+    - app: '"{{app_name}}"'
+    {%- if from_addr is not none %}
+    - from_addr: {{from_addr}}
+    {%- endif %}
+    {%- if to_addr is not none %}
+    - to_addr: {{to_addr}}
+    {%- endif %}
+    {%- if comment is not none %}
+    - comment: '"{{comment}}"'
+    {%- endif %}
+    - listen_in:
+      - cmd: reload-ufw
+
+  {%- endfor %}
+{%- endfor %}

ufw/config/file.sls

@@ -0,0 +1,49 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- set sls_package_install = tplroot ~ '.package.install' %}
+{%- from tplroot ~ "/map.jinja" import ufw with context %}
+{%- from tplroot ~ "/libtofs.jinja" import files_switch with context %}
+
+include:
+  - {{ sls_package_install }}
+
+ufw-default-file-file-managed:
+  file.managed:
+    - name:     {{ ufw.default_file }}
+    - user:     root
+    - group:    root
+    - template: jinja
+    - source: {{ files_switch(['ufw.default.tmpl', 'ufw.default.tmpl.jinja'],
+                              lookup='ufw-default-file-file-managed'
+                 )
+              }}
+    - require:
+      - sls: {{ sls_package_install }}
+    - context:
+        ufw_settings: {{ ufw.settings | json }}
+
+ufw-sysctl-file-file-managed:
+  file.managed:
+    - name:     {{ ufw.sysctl_file }}
+    - user:     root
+    - group:    root
+    - template: jinja
+    - source: {{ files_switch(['ufw.sysctl.tmpl', 'ufw.sysctl.tmpl.jinja'],
+                              lookup='ufw-sysctl-file-file-managed'
+                 )
+              }}
+    - require:
+      - sls: {{ sls_package_install }}
+    - context:
+        ufw_sysctl: {{ ufw.sysctl | json }}
+
+/etc/ufw/applications.d:
+  file.recurse:
+    - user: root
+    - group: root
+    - file_mode: 644
+    - clean: False
+    - source: salt://ufw/files/applications.d

ufw/config/init.sls

@@ -0,0 +1,9 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+include:
+  - .file
+  - .services
+  - .applications
+  - .interfaces
+  - .open

ufw/config/interfaces.sls

@@ -0,0 +1,29 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- set sls_package_install = tplroot ~ '.package.install' %}
+{%- set sls_enable_service  = tplroot ~ '.service.enable' %}
+{%- set sls_reload_service  = tplroot ~ '.service.reload' %}
+{%- from tplroot ~ "/map.jinja" import ufw with context %}
+
+include:
+  - {{ sls_package_install }}
+  - {{ sls_enable_service }}
+  - {{ sls_reload_service }}
+
+# Interfaces
+{%- for interface_name, interface_details in ufw.get('interfaces', {}).items() %}
+  {%- set comment = interface_details.get('comment', None) %}
+
+ufw-interface-{{interface_name}}:
+  ufw.allowed:
+    - interface: {{interface_name}}
+    {%- if comment is not none %}
+    - comment: '"{{comment}}"'
+    {%- endif %}
+    - listen_in:
+      - cmd: reload-ufw
+
+{%- endfor %}

ufw/config/open.sls

@@ -0,0 +1,29 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- set sls_package_install = tplroot ~ '.package.install' %}
+{%- set sls_enable_service  = tplroot ~ '.service.enable' %}
+{%- set sls_reload_service  = tplroot ~ '.service.reload' %}
+{%- from tplroot ~ "/map.jinja" import ufw with context %}
+
+include:
+  - {{ sls_package_install }}
+  - {{ sls_enable_service }}
+  - {{ sls_reload_service }}
+
+# Open
+{%- for open_addr, open_details in ufw.get('open', {}).items() %}
+  {%- set comment = open_details.get('comment', None) %}
+
+ufw-open-{{open_addr}}:
+  ufw.allowed:
+    - from_addr: {{open_addr}}
+    {%- if comment is not none %}
+    - comment: '"{{comment}}"'
+    {%- endif %}
+    - listen_in:
+      - cmd: reload-ufw
+
+{%- endfor %}

ufw/config/services.sls

@@ -0,0 +1,54 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- set sls_package_install = tplroot ~ '.package.install' %}
+{%- set sls_enable_service  = tplroot ~ '.service.enable' %}
+{%- set sls_reload_service  = tplroot ~ '.service.reload' %}
+{%- from tplroot ~ "/map.jinja" import ufw with context %}
+
+include:
+  - {{ sls_package_install }}
+  - {{ sls_enable_service }}
+  - {{ sls_reload_service }}
+
+# Services
+{%- for service_name, service_details in ufw.get('services', {}).items() %}
+
+  {%- set from_addr_raw = service_details.get('from_addr', [None]) %}
+  {%- set from_addrs = [from_addr_raw] if from_addr_raw is string else from_addr_raw %}
+
+  {%- for from_addr in from_addrs %}
+    {%- set protocol  = service_details.get('protocol', None) %}
+    {%- set deny      = service_details.get('deny', None) %}
+    {%- set limit     = service_details.get('limit', None) %}
+    {%- set method    = 'deny' if deny else ('limit' if limit else 'allow') %}
+    {%- set from_port = service_details.get('from_port', None) %}
+    {%- set to_addr   = service_details.get('to_addr', None) %}
+    {%- set to_port   = service_details.get('to_port', service_name) %}
+    {%- set comment   = service_details.get('comment', None) %}
+
+ufw-svc-{{method}}-{{service_name}}-{{from_addr}}:
+  ufw.{{method}}:
+    {%- if protocol is not none %}
+    - protocol: {{protocol}}
+    {%- endif %}
+    {%- if from_addr is not none %}
+    - from_addr: {{from_addr}}
+    {%- endif %}
+    {%- if from_port is not none %}
+    - from_port: "{{from_port}}"
+    {%- endif %}
+    {%- if to_addr is not none %}
+    - to_addr: {{to_addr}}
+    {%- endif %}
+    {%- if comment is not none %}
+    - comment: '"{{comment}}"'
+    {%- endif %}
+    - to_port: "{{to_port}}"
+    - listen_in:
+      - cmd: reload-ufw
+
+  {%- endfor %}
+{%- endfor %}

ufw/defaults.yaml

@@ -1,2 +1,17 @@
-ufwmap:
-  pkg: ufw
+# -*- coding: utf-8 -*-
+# vim: ft=yaml
+---
+ufw:
+  package: ufw
+  packages: []
+  service:
+    name: ufw
+  default_file: /etc/default/ufw
+  sysctl_file: /etc/ufw/sysctl.conf
+  enabled: false
+  settings: {}
+  sysctl: {}
+  services: {}
+  applications: {}
+  interfaces: {}
+  open: {}

ufw/files/applications.d/ufw-databaseserver

@@ -12,7 +12,3 @@ ports=3306/tcp
 title=Postgresql database server
 description=Postgresql database server.
 ports=5432/tcp
-
-
-
-

ufw/templates/default.jinja → ufw/files/default/ufw.default.tmpl.jinja

@@ -1,17 +1,15 @@
-{% set ufw_cfg = pillar.get('ufw', {}) -%}
-{% set settings_cfg = ufw_cfg.get('settings', {}) -%}
-{% set ipv6 = "yes" if settings_cfg.get('ipv6', True) else "no" -%}
-{% set default_input_policy = settings_cfg.get('default_input_policy', 'DROP') -%}
-{% set default_output_policy = settings_cfg.get('default_output_policy', 'ACCEPT') -%}
-{% set default_forward_policy = settings_cfg.get('default_forward_policy', 'DROP') -%}
-{% set default_application_policy = settings_cfg.get('default_application_policy', 'SKIP') -%}
-{% set manage_builtins = "yes" if settings_cfg.get('manage_builtins', False) else "no" -%}
-{% set ipt_sysctl = settings_cfg.get('ipt_sysctl', '/etc/ufw/sysctl.conf') -%}
-{% set ipt_modules = settings_cfg.get('ipt_modules', ['nf_conntrack_ftp', 'nf_nat_ftp', 'nf_conntrack_netbios_ns'])|join(" ") -%}
-
-# /etc/default/ufw
-#
-# File managed by Salt. Do not edit manually.
+########################################################################
+# File managed by Salt at <{{ source }}>.
+# Your changes will be overwritten.
+########################################################################
+{%- set ipv6 = "yes" if ufw_settings.get('ipv6', True) else "no" %}
+{%- set default_input_policy = ufw_settings.get('default_input_policy', 'DROP') %}
+{%- set default_output_policy = ufw_settings.get('default_output_policy', 'ACCEPT') %}
+{%- set default_forward_policy = ufw_settings.get('default_forward_policy', 'DROP') %}
+{%- set default_application_policy = ufw_settings.get('default_application_policy', 'SKIP') %}
+{%- set manage_builtins = "yes" if ufw_settings.get('manage_builtins', False) else "no" %}
+{%- set ipt_sysctl = ufw_settings.get('ipt_sysctl', '/etc/ufw/sysctl.conf') %}
+{%- set ipt_modules = ufw_settings.get('ipt_modules', ['nf_conntrack_ftp', 'nf_nat_ftp', 'nf_conntrack_netbios_ns'])|join(" ") %}
 
 # Set to yes to apply rules to support IPv6 (no means only IPv6 on loopback
 # accepted). You will need to 'disable' and then 'enable' the firewall for

ufw/templates/sysctl.jinja → ufw/files/default/ufw.sysctl.tmpl.jinja

@@ -1,23 +1,23 @@
-{% set ufw_cfg = pillar.get('ufw', {}) -%}
-{% set sysctl_cfg = ufw_cfg.get('sysctl', {}) -%}
-{% set forwarding = sysctl_cfg.get('forwarding', 0) -%}
-{% set rp_filter = sysctl_cfg.get('rp_filter', 1) -%}
-{% set accept_source_route = sysctl_cfg.get('accept_source_route', 0) -%}
-{% set accept_redirects = sysctl_cfg.get('accept_redirects', 0) -%}
-{% set icmp_echo_ignore_broadcasts = sysctl_cfg.get('icmp_echo_ignore_broadcasts', 1) -%}
-{% set icmp_ignore_bogus_error_responses = sysctl_cfg.get('icmp_ignore_bogus_error_responses', 1) -%}
-{% set icmp_echo_ignore_all = sysctl_cfg.get('icmp_echo_ignore_all', 0) -%}
-{% set log_martians = sysctl_cfg.get('log_martians', 0) -%}
-{% set tcp_syncookies = sysctl_cfg.get('tcp_syncookies', 0) -%}
-{% set tcp_sack = sysctl_cfg.get('tcp_sack', 1) -%}
-{% set ipv6_autoconf = sysctl_cfg.get('ipv6_autoconf', 1) -%}
-{% set use_tempaddr = sysctl_cfg.get('use_tempaddr', 1) -%}
-# File managed by Salt. Do not edit manually.
-#
+########################################################################
+# File managed by Salt at <{{ source }}>.
+# Your changes will be overwritten.
+########################################################################
+{%- set forwarding = ufw_sysctl.get('forwarding', 0) %}
+{%- set rp_filter = ufw_sysctl.get('rp_filter', 1) %}
+{%- set accept_source_route = ufw_sysctl.get('accept_source_route', 0) %}
+{%- set accept_redirects = ufw_sysctl.get('accept_redirects', 0) %}
+{%- set icmp_echo_ignore_broadcasts = ufw_sysctl.get('icmp_echo_ignore_broadcasts', 1) %}
+{%- set icmp_ignore_bogus_error_responses = ufw_sysctl.get('icmp_ignore_bogus_error_responses', 1) %}
+{%- set icmp_echo_ignore_all = ufw_sysctl.get('icmp_echo_ignore_all', 0) %}
+{%- set log_martians = ufw_sysctl.get('log_martians', 0) %}
+{%- set tcp_syncookies = ufw_sysctl.get('tcp_syncookies', 0) %}
+{%- set tcp_sack = ufw_sysctl.get('tcp_sack', 1) %}
+{%- set ipv6_autoconf = ufw_sysctl.get('ipv6_autoconf', 1) %}
+{%- set use_tempaddr = ufw_sysctl.get('use_tempaddr', 1) %}
+
 # Configuration file for setting network variables. Please note these settings
 # override /etc/sysctl.conf. If you prefer to use /etc/sysctl.conf, please
 # adjust IPT_SYSCTL in /etc/default/ufw.
-#
 
 # Uncomment this to allow this host to route packets between interfaces
 net/ipv4/ip_forward={{ forwarding }}
@@ -69,4 +69,4 @@ net/ipv6/conf/all/autoconf={{ ipv6_autoconf }}
 
 # Uncomment this to enable ipv6 privacy addressing
 net/ipv6/conf/default/use_tempaddr={{ use_tempaddr }}
-net/ipv6/conf/all/use_tempaddr={{ use_tempaddr }}
+net/ipv6/conf/all/use_tempaddr={{ use_tempaddr }}

ufw/init.sls

@@ -1,175 +1,7 @@
-# UFW management module
-{%- set ufw = pillar.get('ufw', {}) %}
-{%- if ufw.get('enabled', False) %}
-{% from "ufw/map.jinja" import ufwmap with context %}
-{% set default_template = ufw.get('default_template', 'salt://ufw/templates/default.jinja') -%}
-{% set sysctl_template = ufw.get('sysctl_template', 'salt://ufw/templates/sysctl.jinja') -%}
-{% set settings_cfg = ufw.get('settings', {}) -%}
-{% set loglevel = settings_cfg.get('loglevel', 'low') -%}
+# -*- coding: utf-8 -*-
+# vim: ft=sls
 
-ufw:
-  pkg.installed:
-    - name: {{ ufwmap.pkg }}
-  service.running:
-    - enable: True
-    - watch:
-      - file: /etc/default/ufw
-      - file: /etc/ufw/sysctl.conf
-
-/etc/default/ufw:
-  file.managed:
-    - template: jinja
-    - user: root
-    - group: root
-    - mode: 644
-    - source: {{ default_template }}
-
-/etc/ufw/sysctl.conf:
-  file.managed:
-    - template: jinja
-    - user: root
-    - group: root
-    - mode: 644
-    - source: {{ sysctl_template }}
-
-/etc/ufw/applications.d:
-  file.recurse:
-    - user: root
-    - group: root
-    - file_mode: 644
-    - clean: False
-    - source: salt://ufw/files/applications.d
-
-  # services
-  {%- for service_name, service_details in ufw.get('services', {}).items() %}
-
-    {%- set from_addr_raw = service_details.get('from_addr', [None]) -%}
-    {%- set from_addrs = [from_addr_raw] if from_addr_raw is string else from_addr_raw -%}
-
-    {%- for from_addr in from_addrs %}
-      {%- set protocol  = service_details.get('protocol', None) %}
-      {%- set deny      = service_details.get('deny', None) %}
-      {%- set limit     = service_details.get('limit', None) %}
-      {%- set method    = 'deny' if deny else ('limit' if limit else 'allow') -%}
-      {%- set from_port = service_details.get('from_port', None) %}
-      {%- set to_addr   = service_details.get('to_addr', None) %}
-      {%- set to_port   = service_details.get('to_port', service_name) %}
-      {%- set comment   = service_details.get('comment', None) %}
-
-ufw-svc-{{method}}-{{service_name}}-{{from_addr}}:
-  ufw.{{method}}:
-    {%- if protocol != None %}
-    - protocol: {{protocol}}
-    {%- endif %}
-    {%- if from_addr != None %}
-    - from_addr: {{from_addr}}
-    {%- endif %}
-    {%- if from_port != None %}
-    - from_port: "{{from_port}}"
-    {%- endif %}
-    {%- if to_addr != None %}
-    - to_addr: {{to_addr}}
-    {%- endif %}
-    {%- if comment != None %}
-    - comment: '"{{comment}}"'
-    {%- endif %}
-    - to_port: "{{to_port}}"
-    - require:
-      - pkg: ufw
-    - listen_in:
-      - cmd: reload-ufw
-
-    {%- endfor %}
-
-  {%- endfor %}
-
-  # Applications
-  {%- for app_name, app_details in ufw.get('applications', {}).items() %}
-
-    {%- set from_addr_raw = app_details.get('from_addr', [None]) -%}
-    {%- set from_addrs = [from_addr_raw] if from_addr_raw is string else from_addr_raw -%}
-
-    {%- for from_addr in from_addrs %}
-      {%- set deny    = app_details.get('deny', None) %}
-      {%- set limit   = app_details.get('limit', None) %}
-      {%- set method  = 'deny' if deny else ('limit' if limit else 'allow') -%}
-      {%- set to_addr = app_details.get('to_addr', None) %}
-      {%- set comment = app_details.get('comment', None) %}
-
-{%- if from_addr != None%}
-ufw-app-{{method}}-{{app_name}}-{{from_addr}}:
-{%- else %}
-ufw-app-{{method}}-{{app_name}}:
-{%- endif %}
-  ufw.{{method}}:
-    - app: '"{{app_name}}"'
-    {%- if from_addr != None %}
-    - from_addr: {{from_addr}}
-    {%- endif %}
-    {%- if to_addr != None %}
-    - to_addr: {{to_addr}}
-    {%- endif %}
-    {%- if comment != None %}
-    - comment: '"{{comment}}"'
-    {%- endif %}
-    - require:
-      - pkg: ufw
-    - listen_in:
-      - cmd: reload-ufw
-
-    {%- endfor %}
-  {%- endfor %}
-
-  # Interfaces
-  {%- for interface_name, interface_details in ufw.get('interfaces', {}).items() %}
-    {%- set comment = interface_details.get('comment', None) %}
-
-ufw-interface-{{interface_name}}:
-  ufw.allowed:
-    - interface: {{interface_name}}
-    {%- if comment != None %}
-    - comment: '"{{comment}}"'
-    {%- endif %}
-    - require:
-      - pkg: ufw
-    - listen_in:
-      - cmd: reload-ufw
-
-  {%- endfor %}
-
-  # Open
-  {%- for open_addr, open_details in ufw.get('open', {}).items() %}
-    {%- set comment = open_details.get('comment', None) %}
-
-ufw-open-{{open_addr}}:
-  ufw.allowed:
-    - from_addr: {{open_addr}}
-    {%- if comment != None %}
-    - comment: '"{{comment}}"'
-    {%- endif %}
-    - require:
-      - pkg: ufw
-    - listen_in:
-      - cmd: reload-ufw
-
-  {%- endfor %}
-
-enable-ufw:
-  ufw.enabled:
-    - require:
-      - pkg: ufw
-
-reload-ufw:
-  cmd.wait:
-    - name: ufw reload
-
-set-logging:
-  cmd.run:
-    - name: ufw logging {{ loglevel }}
-    - unless: "grep 'LOGLEVEL={{ loglevel }}' /etc/ufw/ufw.conf"
-
-{% else %}
-  #ufw:
-    #ufw:
-      #- disabled
-{% endif %}
+include:
+  - .package
+  - .config
+  - .service

ufw/libtofs.jinja

@@ -0,0 +1,100 @@
+{%- macro files_switch(source_files,
+                       lookup=None,
+                       default_files_switch=['id', 'os_family'],
+                       indent_width=6,
+                       v1_path_prefix='') %}
+  {#-
+    Returns a valid value for the "source" parameter of a "file.managed"
+    state function. This makes easier the usage of the Template Override and
+    Files Switch (TOFS) pattern.
+
+    Params:
+      * source_files: ordered list of files to look for
+      * lookup: key under '<tplroot>:tofs:source_files' to override
+        list of source files
+      * default_files_switch: if there's no config (e.g. pillar)
+        '<tplroot>:tofs:files_switch' this is the ordered list of grains to
+        use as selector switch of the directories under
+        "<path_prefix>/files"
+      * indent_witdh: indentation of the result value to conform to YAML
+      * v1_path_prefix: (deprecated) only used for injecting a path prefix into
+        the source, to support older TOFS configs
+
+    Example (based on a `tplroot` of `xxx`):
+
+    If we have a state:
+
+      Deploy configuration:
+        file.managed:
+          - name: /etc/yyy/zzz.conf
+          - source: {{ files_switch(['/etc/yyy/zzz.conf', '/etc/yyy/zzz.conf.jinja'],
+                                    lookup='Deploy configuration'
+                    ) }}
+          - template: jinja
+
+    In a minion with id=theminion and os_family=RedHat, it's going to be
+    rendered as:
+
+      Deploy configuration:
+        file.managed:
+          - name: /etc/yyy/zzz.conf
+          - source:
+            - salt://xxx/files/theminion/etc/yyy/zzz.conf
+            - salt://xxx/files/theminion/etc/yyy/zzz.conf.jinja
+            - salt://xxx/files/RedHat/etc/yyy/zzz.conf
+            - salt://xxx/files/RedHat/etc/yyy/zzz.conf.jinja
+            - salt://xxx/files/default/etc/yyy/zzz.conf
+            - salt://xxx/files/default/etc/yyy/zzz.conf.jinja
+          - template: jinja
+  #}
+  {#- Get the `tplroot` from `tpldir` #}
+  {%- set tplroot = tpldir.split('/')[0] %}
+  {%- set path_prefix = salt['config.get'](tplroot ~ ':tofs:path_prefix', tplroot) %}
+  {%- set files_dir = salt['config.get'](tplroot ~ ':tofs:dirs:files', 'files') %}
+  {%- set files_switch_list = salt['config.get'](
+      tplroot ~ ':tofs:files_switch',
+      default_files_switch
+  ) %}
+  {#- Lookup source_files (v2), files (v1), or fallback to source_files parameter #}
+  {%- set src_files = salt['config.get'](
+      tplroot ~ ':tofs:source_files:' ~ lookup,
+      salt['config.get'](
+          tplroot ~ ':tofs:files:' ~ lookup,
+          source_files
+      )
+  ) %}
+  {#- Only add to [''] when supporting older TOFS implementations #}
+  {%- set path_prefix_exts = [''] %}
+  {%- if v1_path_prefix != '' %}
+    {%- do path_prefix_exts.append(v1_path_prefix) %}
+  {%- endif %}
+  {%- for path_prefix_ext in path_prefix_exts %}
+    {%- set path_prefix_inc_ext = path_prefix ~ path_prefix_ext %}
+    {#- For older TOFS implementation, use `files_switch` from the config #}
+    {#- Use the default, new method otherwise #}
+    {%- set fsl = salt['config.get'](
+        tplroot ~ path_prefix_ext|replace('/', ':') ~ ':files_switch',
+        files_switch_list
+    ) %}
+    {#- Append an empty value to evaluate as `default` in the loop below #}
+    {%- if '' not in fsl %}
+      {%- do fsl.append('') %}
+    {%- endif %}
+    {%- for fs in fsl %}
+      {%- for src_file in src_files %}
+        {%- if fs %}
+          {%- set fs_dir = salt['config.get'](fs, fs) %}
+        {%- else %}
+          {%- set fs_dir = salt['config.get'](tplroot ~ ':tofs:dirs:default', 'default') %}
+        {%- endif %}
+        {%- set url = '- salt://' ~ '/'.join([
+            path_prefix_inc_ext,
+            files_dir,
+            fs_dir,
+            src_file.lstrip('/')
+        ]) %}
+{{ url | indent(indent_width, true) }}
+      {%- endfor %}
+    {%- endfor %}
+  {%- endfor %}
+{%- endmacro %}

ufw/map.jinja

@@ -1,17 +1,24 @@
-{% import_yaml 'ufw/defaults.yaml' as default_settings %}
+# -*- coding: utf-8 -*-
+# vim: ft=jinja
 
-{% set os_family_map = salt['grains.filter_by']({
-        'Gentoo': {
-            'pkg': 'net-firewall/ufw',
-        },
-    },
-    grain="os_family",
-    merge=salt['pillar.get']('ufw:lookup')) or {}
-%}
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{#- Start imports as #}
+{%- import_yaml tplroot ~ "/defaults.yaml" or {} as default_settings %}
+{%- import_yaml tplroot ~ "/osfamilymap.yaml" or {} as osfamilymap %}
+{%- import_yaml tplroot ~ "/osmap.yaml" or {} as osmap %}
+{%- import_yaml tplroot ~ "/osfingermap.yaml" or {} as osfingermap %}
 
-{% set ufwmap = salt['grains.filter_by'](
-        default_settings,
-        merge=os_family_map,
-        base='ufwmap',
+{%- set defaults = salt['grains.filter_by'](default_settings,
+  default='ufw',
+  merge=salt['grains.filter_by'](osfamilymap, grain='os_family',
+    merge=salt['grains.filter_by'](osmap, grain='os',
+      merge=salt['grains.filter_by'](osfingermap, grain='osfinger',
+        merge=salt['pillar.get']('ufw:lookup', default={})
+      )
     )
-%}
+  )
+) %}
+
+{#- Merge the ufw pillar #}
+{%- set ufw = salt['pillar.get']('ufw', default=defaults, merge=True) %}

ufw/osfamilymap.yaml

@@ -0,0 +1,12 @@
+# -*- coding: utf-8 -*-
+# vim: ft=yaml
+---
+Debian:
+  packages:
+    - python-ufw
+RedHat: {}
+Suse:
+  packages:
+    - iptables
+Gentoo:
+  package: net-firewall/ufw

ufw/osfingermap.yaml

@@ -0,0 +1,12 @@
+# -*- coding: utf-8 -*-
+# vim: ft=yaml
+---
+Debian-8: {}
+Debian-9: {}
+Ubuntu-16.04: {}
+Ubuntu-18.04: {}
+Fedora-28: {}
+Fedora-29: {}
+CentOS-7: {}
+CentOS-6: {}
+openSUSE-4.23: {}

ufw/osmap.yaml

@@ -0,0 +1,8 @@
+# -*- coding: utf-8 -*-
+# vim: ft=yaml
+---
+Debian: {}
+Ubuntu: {}
+Fedora: {}
+CentOS: {}
+openSUSE: {}

ufw/package/init.sls

@@ -0,0 +1,5 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+include:
+  - .install

ufw/package/install.sls

@@ -0,0 +1,16 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- from tplroot ~ "/map.jinja" import ufw with context %}
+
+ufw-package-install-pkg-installed:
+  pkg.installed:
+    - name: {{ ufw.package }}
+
+{%- for pkg in ufw.packages %}
+ufw-package-{{ pkg }}-install-pkg-installed:
+  pkg.installed:
+    - name: {{ pkg }}
+{%- endfor %}

ufw/python.sls

@@ -1,3 +0,0 @@
-python-ufw:
-  pkg.installed:
-    - name: python-ufw

ufw/service/enable.sls

@@ -0,0 +1,18 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- from tplroot ~ "/map.jinja" import ufw with context %}
+
+{%- if ufw.get('enabled', False) %}
+{%- set loglevel = ufw.get('settings:loglevel', 'low') %}
+
+enable-ufw:
+  ufw.enabled
+
+set-logging:
+  cmd.run:
+    - name: ufw logging {{ loglevel }}
+    - unless: "grep 'LOGLEVEL={{ loglevel }}' /etc/ufw/ufw.conf"
+{%- endif %}

ufw/service/init.sls

@@ -0,0 +1,6 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+include:
+  - .enable
+  - .running

ufw/service/reload.sls

@@ -0,0 +1,14 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- from tplroot ~ "/map.jinja" import ufw with context %}
+
+{%- if ufw.get('enabled', False) %}
+
+reload-ufw:
+  cmd.wait:
+    - name: ufw reload
+
+{%- endif %}

ufw/service/running.sls

@@ -0,0 +1,30 @@
+# -*- coding: utf-8 -*-
+# vim: ft=sls
+
+{#- Get the `tplroot` from `tpldir` #}
+{%- set tplroot = tpldir.split('/')[0] %}
+{%- set sls_config_file = tplroot ~ '.config.file' %}
+{%- from tplroot ~ "/map.jinja" import ufw with context %}
+
+include:
+  - {{ sls_config_file }}
+
+{%- if ufw.get('enabled', False) %}
+
+ufw-service-running-service-running:
+  service.running:
+    - name: {{ ufw.service.name }}
+    - enable: true
+    - require:
+      - sls: {{ sls_config_file }}
+
+{%- else %}
+
+ufw-service-dead-service-dead:
+  service.dead:
+    - name: {{ ufw.service.name }}
+    - enable: false
+    - require:
+      - sls: {{ sls_config_file }}
+
+{%- endif %}